Aqualisa Pinch Grip sliding handset holder - 25mm - Chrome/Grey

Product Information

Bath control (horizontal orientation) On the right of the control you will see the clip – press in to release the control. Shower control (vertical orientation) On the underside of the control you will see the clip – press in to release the control. If the model being replaced is the Classic, the inlets will need to be reduced from 164mm to 150mm and the outlet reduced from 22mm to 15mm. Most of our adjustable heads simply unscrew from the hose but our range also includes models with an "anti-twist" feature to prevent kinking and damage to the hose. (Running from left to right: Axis, Harmony, Opto, Vita)

Good fitting my only compliant iss the rachet mechanism to hold the shower head is very difficult to reposition as it takes alot of effort and it feels it might break before it moves-surely something could be done to make it easier to reposition the shower head Please note: our Thermostatic and Digital products are not designed to work on mixed supplies (e.g. mains cold / gravity hot) or combination cylinders due to inadequate cold water capacity and working head distance. Inlet centres have remained the same across all generations of our Smart valves. A2 and A1 Smart Valves share the same centres however, the location of the mixed supply pipe differs and would need altering if changing from gravity to high pressure.Don't know why someone hadn't thought of it before, but the new handset holder is absolutely brilliant. It was so easy to fit and it should last year's, not the short time that other holders have survived. The service from Pumbworld was pretty in good too. Aqualisa iSystem exposed digital bath shower with adj shower head & bath filler overflow - HP/Combi

If the Smart Valve currently fitted is standard HP (A1), this would suggest that the gravity water system has a separate booster pump to pressurise the water. In this case, the Smart Valve is already compatible for the change to high pressure, however the settings on the logic will need to be switched "HP Combi" if intended to be fitted on a combi boiler water system. I am not a handyman but it was easy to fix: just pulled off the the bottom cover of slide rail, unscrewed the wall screw and could lower the slide rail for removal of old grip and replacement. New grip does the same job. Aqualisa iSystem concealed digital shower with adjustable and ceiling fixed shower heads - Hp/CombiSlide the old handset holder off the rail (dependent on the type of handset holder, you will need to use the pinch mechanism, button, or twist lever to release the grip on the rail).

Concealed control - On the underside of the control, you will see a single self-retaining screw with a cross-head – loosen the screw to release the securing end cap. Speed of delivery of the spare part was exemplary. High quality part as it was a genuine manufacturer spare. Carefully remove the wall plate which will be secured using silicone sealant. This will expose the PCB which connect to the control knobs.

Thermostatic Products (including Aquastream)

Shower control (vertical orientation) On the underside of the control you will see a single self-retaining screw with a cross-head – to release the control.