10PC Steel T-Bolt Clamps Turbo Intake Intercooler Clamp for 1 inch Hose (32-37mm，10 Pcs)

Product Information

Pipe clamps can protect your pipes and reinforce your entire pipe system. But when it comes to securing your pipes, they just scratch the surface. There is a whole world of pipe restraints that can strengthen your pipe system and save you long-term costs. Lastly we have our bypass valve, which is not labeled on the diagram above. This component is nearly always found on modern CAC systems, its primary function being to reduce compressor surge when the throttle is closed (during shifts). This allows pressure to vent into the atmosphere instead of building up in the system. Compressor surge occurs when air pressure after the housing is higher than what the unit itself can maintain. At times, this can result in a compressor stall and even turbocharger bearing failure. The bypass valve is important, as it opens up during these high-pressure instances to decrease pressure and keep the turbocharger properly in boost. This component can be found mounted to the intake piping, with a vacuum line running to the engine. What a Leak Can Do To Your Vehicle

VW Vento - CTHA (150) CAVA (150) CTHD (160) CAVD (160) CPRA (170) CPKA (170) CAWB (200) BWA (200) BPY (200) CCTA (200) CBFA (200) CCZA (200) Seat Leon - CDAA (160) BZB (160) CJSB (180) CJSA (180) AUQ (180) ARY (180) APP (180) AJQ (180) BWA (200) AMK (209) CCZB (211) BAM (225) CDLD (241) BWJ (241) CJXE (265) CDLA (265) CJXA (280)

Types of Metal Pipe Clamps

We have been in the pipe fixing business for over 75 years so we have the knowledge and expertise to advise you on how to determine the correct distance between clamps to ensure a safe installation. Pipe clamps aren’t just versatile in their design. You can also use pipe clamps to secure pipes in a number of ways. Here are some common ways to use pipe clamps to reinforce your pipes: At Walraven, we have a huge range of adjustable pipe clamps that fit 99% of known pipe sizes, including clamps suitable to install over insulation. The smallest clamp in our range is 12mm, the largest is 1200mm. Even if your pipe is outside of these sizes we can manufacture custom pipe clamps. Get in touch with us to see how we can help your next pipe clamps project.

By welding a pipe clamp to a pipe shoe, you can lift pipes off surfaces, keep them secure, and separate them from destructive forces. Suspend Pipes

Unlike some other pipe clamp manufacturers, all of our pipe fixings are manufactured within our factories at Walraven. We don’t outsource anything, and so we control the manufacturing process from start to finish. This means we have 100% control over the quality of our products at all times. The Mass Airflow (MAF) sensor is responsible for measuring how much air is going into the engine. If a leak occurs between the MAF sensor and the engine, measured air is lost. In this guide, we cover the signs of a boost leak, explain what it is and show you how to find it. We also discuss the average cost to fix a boost leak and answer some questions you might have while reading this article. Boost Leak Symptoms Intercooler: Compressed air passes through the intercooler before it enters the engine. The intercooler is needed to cool down the hot air that’s created from the compressor and it supplies it with more oxygen, making it useable by the engine. When the intercooler fails, a leak can occur. Your pipe runs don’t always have a convenient beam or support surface to rest on. Pipe clamps let you suspend pipes and secure them in overhead spaces. By teaming your pipe clamps up with threaded rods and a clevis, you can string up pipe runs, encourage better pipe flow, and physically separate pipes from dangerous surfaces. Protect Pipes from the Elements