Cuprinol Garden Shades Wood Paint - Cornflower - 1L

Product Information

As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure. A. It depends on how long ago your shed and fence panels where oiled. Cuprinol Garden Shades paint is a water based product so any remaining oil or wax from previous treatments will likely repel the paint. If the timber hasn't been treated for a couple of years it may be OK. In situations like this we always recommend a test area before starting the main project to test adhesion. Q. Is Cuprinol Garden Shades suitable for a large log cabin / summerhouse at the end of the garden? Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours. Apply second coat as above. The second coat must be applied the same day as the first. If the first coat is left to dry overnight then the second coat will not adhere to the surface correctly

Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. My love of color and pattern was completely missing from our garden. It was like my taste and style stopped at the bifold doors and I was always apologizing to guests when they came over, saying I liked the garden neat and tidy (devoid of character) and was going to let it grow wild (which was obviously a code word for I’m lazy!) MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. With a promise of 6 year weather protection on wooden surfaces, this water based paint takes approximately 8 hours to dry and covers up to 12m² per litre on average. Easily applied with a brush, roller or sprayer, this beautifully designed paint is available in 2 sizes including Cuprinol Garden Shades 1L and Cuprinol Garden Shades 2.5L. For optimum results, a maximum of 2 coats is generally required. Urban Slate has an upscale, modern aesthetic. It gives a stylish, refined look to any outdoor space. Cuprinol Country CreamWillow– The pale sage green shade has a very soft, inviting look that complements gardens nicely without overpowering. Willow resembles the colors found in nature. It will give a fence a lush, earthy feel that blends into the surroundings. The greenish-gray beige tone pairs well with bushes, plants, and wood structures in gardens of any style. Cuprinol Olive Garden Cuprinol Garden Shades offer a wide variety of colours and finishes to choose from. Here are some of the best options to consider and where to use them: Cuprinol Fence Paint Colours I present to you my fence! And patchy grass (we’re working on it!)

Olive Garden– If you don’t want to stray too far away from the wood shades of a fence, Olive Garden could work. The natural olive green tone perfectly captures the colors seen in nature. It has an earthy, organic look.Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. Q. Is Cuprinol Garden Shades suitable for garden fences and is it solvent-based? Does it contain any wax? We put a new fence up around our garden and after a few months over the summer, it was already showing signs of damage. The fence is pine and it desperately needed painting. Don't apply in temperatures below 5°C, in damp conditions or if rain is likely before the product has dried. Low air temperature and or high humidity may prolong the overall drying time of the product.

Q. I want to use a wood preserver on my garden fencing before painting with Cuprinol Garden Shades. Which one should I use? Sun exposure – Lighter tints hold up better in direct sun over time than darker shades which can fade faster. A. Absolutely! Cuprinol Garden Shades is suitable for any garden structure including summerhouses and log cabins. If it's a bare wood structure, new or old, its probably worth treating it with a wax free wood preservative first to protect the wood from mould, algae and fungi. Allow this to fully dry before painting. Its important than any preservative used is wax free otherwise the paint may not adhere to the structure. The mood you want to create – light, bright shades feel airy and calm, while bold saturated shades are dramatic and inviting. Neutral natural wood tones create a relaxed vibe.Specially designed to colour, protect and brighten up your garden furniture, shed & fence. Cuprinol Garden Shades allow the natural texture of the wood to shine through Thankfully, I only needed to apply one coat as it applied really well and easily. We have concrete bollards holding up the fence panels and I did consider painting them as well, but in the end, I went with painting a pattern onto them with Iris to create a bit of a feature.