Lithofin MN Stain-Stop Impregnator Sealer For Artificial & Natural Stone 250ml

Product Information

A special product from the Lithofin range for marble, natural and engineered stone. Lithofin MN Stain-Stop is a ready-to-use, solvent-based impregnator that contains high quality water and oil resistant components. Delivery times are Monday - Friday (excluding Bank Holidays) from 7:30am - 6:00pm. Most deliveries leave on Express Delivery for 1 - 3 working day delivery service. A 'working day' is Monday to Friday, excluding bank holidays. Weekends and bank holidays do not count as working days.

On highly absorbent stones, keep wet between 5-15 minutes and ensure even distribution. Within 1 hour, repeat the process up to four times, depending on the absorbency of the stone. In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). In case of fire formation of dangerous gases possible. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners. Please note that the liquid product must penetrate into the stone. Do not allow the product to dry on the surface. Non-absorbent or damp surfaces cannot be impregnated. Glass, ceramics, and surfaces sensitive to solvents (varnishes, wood, etc.) must be protected against Lithofin Stain Stop is for invisible protection against staining and for facilitating maintenance of all natural stone surfaces, including polished marble. It is UV-resistant and does not yellow.

Most of the solvents evaporate within two hours. Floors can be walked on after 12 hours. The impregnator is fully effective after 24 to 48 hours. Find the answers to your common questions regarding the sealing of tile, grout, and natural stone here by chatting to one of our team of experts now.Lithofin MN Stain-Stop is a special impregnator invisible sealer that provides optimal protection for absorbent natural and artificial stone surfaces against staining. It prevents penetration of oil, grease, and water and makes further maintenance easier. When used on work surfaces the product is food safe once dry. Lithofin MN Stain-Stop does not leave a gloss finish and remains effective for many years.

For invisible protection against staining and for facilitating maintenance of all natural stone surfaces, including polished marble. Perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces. Suitable for indoor and outdoor use. Please Note: marble and limestone will remain sensitive to acid. even distribution. Completely remove all excess – do not allow to dry on the surface if not being absorbed into the stone.A special product from the LITHOFIN-Range for marble, natural and concrete stone (MN). Lithofin MN Stain-Stop contains high quality water and oil resistant components based on alkoxysilanes.

Many products on the market have been designed to enhance and "protect" the surfaces of stone, tile, and grout, including sealers, finishes, colour enhancers, and waxes. As the name implies, sealers actually seal the surface tight against chemicals, water, and other contaminants. We are glad you are here and Stone Doctor Australia gives you one of the best sealers from a Lithofin brand; Lithofin MN Stain-Stop. Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend MN Wash & Clean, for kitchen counter tops MN Easy-Clean. Lithofin Stain Stop PLUS contains high-quality water and oil repellent agents based on siloxanes and dissolved in solvents. It is similar to MN Stain Stop but differs in that it also contains special additives that permanently intensify the colour structure. Lithofin Stain Stop is perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces. Please Note: marble and limestone will remain sensitive to acid.Lithofin Stain Stop lasts up to 5 years on outdoor surfaces. Indoors the durability depends on the care products used. Strong de-greasing or layer forming products are unsuitable. Heavily used surfaces such as kitchen counters and vanity tops should be touched up once a year with the solvent-free STAINSTOP W. Outdoors, the colour intensifying component lasts for one to two years, depending on the type of stone and the weather. The protective component will last for about three years. Indoors, the durability depends on the care products used. Strong degreasing agents and layer forming products are not suitable. For regular maintenance, we recommend MN Wash & Clean which supports the effect of the product. Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend Lithofin MN Wash & Clean, for kitchen counter tops Lithofin MN Easy-Clean. Lithofin MN Stain Stop contains high quality water and oil resistant components, penetrating into the surface and coating the capillaries with an extremely thin invisible film. Oil, grease and water are not absorbed by the surface, but remain on the surface where it can be easier wiped off and cleaned. During this time, even oil can easily be removed without leaving stains.