Pucket frantic wooden game

Product Information

Using glue and a band clamp you can easily make the puzzle. If you want extra strength you could add nails trough the bottom to secure everything even more. Probably the hardest part of this version is the centre piece: Make a ‘goal’ right in the middle of the piece with an opening of 50mm by 20mm. Bigger is easier, smaller is harder. After cutting the long pieces to size, make 2 small holes at each end for the screws. And repeat this step for the screws in the middle Extra for the short piece: Round over the middle part so it’s easier on the touch while playing. Sanding the sharp corners will work just as well. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items.

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.The centre piece: Make a ‘goal’ right in the middle of the piece with an opening of 50mm by 20mm. Bigger is easier, smaller is harder.

The fancy model comes with mitred corners, inlay bottom, strong centre with tongue and groove connection and a round over for each player for a soft touch while playing. The rule book comes with descriptions of several different techniques. My favorite is “The Garner” which is described as follows. I made this entire project with birch plywood (18mm) since I had some left from an old project. But you could use whatever you have on hand. Just make sure to adjust the dimensions as you go. Once everything is dry the last thing to do is wax the bottom piece, so everything slides as smooth as possible. We have a 7-days return policy, which means you have 7 days after receiving your item to request a return.Extra for the long sides: make a groove right in the middle. The width depends on your material, for me it was 18mm. Next make 2 holes at either end of the sides to put the elastic/Bungee cord through. Delivery time is between 5 to 7 working days (No delivery on Sundays). However delivery can take up to 7 working days during busy shopping season.

Note: Lumber dimensions are listed as nominal size. See lumber sizes for actual dimensions vs nominal.Put the center piece and the shorter pieces at the right place, hold everything tight together and screw in the screws.