Tamiya 87038 Extra Thin Cement, 40ml

Product Information

There is no way to tell if these similar health issues would be present in human beings. The Effects of Butanone in Health The glue can be used to glue canopies of aircraft models or windscreens of car models without fear of them getting damaged. If you accidentally put the glue where you don’t want it, just wipe it off with a moistened q-tip. The glue is waterproof when cured. For example, a bit of isopropyl alcohol can be used to remove the cured glue. When a regular plastic cement takes 2-3 minutes to set up completely, Tamiya’s extra thin adhesive only takes 10 seconds to set, thanks to its capillary action mechanism.

As the name suggests, this type of cement has a much thinner consistency than the regular one. That means these types are used in a slightly different manner. You can essentially dry-fit the parts together and then use a fine brush to run a small amount of the glue around the seams of the parts. Thanks to the capillary action of the thin liquid, the cement will find its way between the dry-fitted parts and weld them together. This is especially useful for smaller parts; however, some modelers use these glues for the whole model. The strong, pungent odor can assist you in avoiding inhaling dangerously high concentrations of acetone. On its own, this cement smooths out those rough parts where you got a bit carried away with a chisel cut or something, and it reduces gap filling and cleanup to almost pro levels of efficiency. How long does it take for Tamiya extra thin cement to set? Tamiya’s extra thin cement melts plastic so rapidly and thoroughly that brushing over the same area will result in a little bit of plastic collecting on the brush’s tip.

Delivery Infomation

Although butanone has no significant impact on the liver or nervous system, it can induce other chemicals to become more toxic to these systems. Tamiya’s extra thin cement makes effective use of this capillary action by filling every small gap between the two surfaces you’re attempting to join. It is also a great helper when you need to create the glass of positional and other lights on a model. Just a put small blob of the glue where you want the “glass” to form and leave it to dry. When dry, it is possible to paint the “glass” with acrylic clear paints such as Tamiya’s X-27 Clear Red. Another sign of the strong melting potency is that liquid plastic will flow out of the joint after letting it take some time to work once you squeeze the pieces together really hard. Micro Kristal Klear is a glue which is typically used to glue clear parts to create small windows up to about ¼ square inch.

Glue is drawn into the plastic as a result of this action. It brings the two sections together and combines them at the seam. To use the Tamiya extra thin cement, you simply hold the model together by applying the glue using the tiny brush (included in the cap) to the joint and waiting for about 40 seconds for it to dry completely. You can also use the extra thin cement as a thinner by mixing it with regular cement if necessary.Ok, so what follows are a series of short HD videos where I give you an overview of the range of glues and adhesives I use, followed by separate entries showing each one in a little more detail and how to use it.