Apogee JAM 96k Guitar Interface Input for iPad, iPhone and Mac

Product Information

Other tech specs for the StroboStomp Mini include its 390Hz - 490Hz Concert A Reference, +5 to -6 Transposition, and it runs on a 9V DC pedalboard power supply or via USB-C bus power. Jam's sound quality is first-generation, Jam's recording resolution and sample rate are 24 bit Up to 44.1/48kHz recording, Jam's input is one 1/4??, It has no output, Jam's connection type is a proprietary connector, Jam's compatibility is with Mac/iOS, Jam's cables included are USB A and Lightning, Jam does not have software included, it does not have low latency monitoring, it does not have overdrive, and its build quality is soft-touch plastic. Apogee Electronics recently announced the latest in its jam series of guitar interfaces: Jam X. Building on the original Jam interface from 2010, Jam X provides the easiest way to connect your guitar to a computer or iOS device for studio-quality sound. This flexibility for the input signal gives you extra shaping power over your sound before it's even reached any virtual amp sims you might be sending it too. Apogee says that with this at the front of the signal chain, guitarists will experience added sustain and dynamics, or can use Jam X to fatten up weaker source sounds. Another problem with the Jam is the difficulty of adjusting the input level to avoid clipping. The simple LED light clearly shows when clipping occurs, but the dial that sets the input level is not marked with numbers or defined settings. As a result, each time a user connects a guitar, time must be spent adjusting the signal level. For users who typically play through the same guitar set-up, a numbered dial would make this process much more efficient. The Bottom Line: Cheap, Easy, Impressive

As far as the construction is concerned, no other USB input beats the iRig HD 2 digital USB input. It features a 1/8″ headphone output, a dedicated top-quality preamp, and a volume level dial. To enter the low latency mode in your Apogee Jam Plus USB input, simply press the button, and it will activate this mode. The LED is useful in that it has three colours: blue means that the Jam is connected but not active, green means connected and active, and red means that the signal level has overloaded the input. Usefully, the green LED also gets brighter when a higher signal level is present. NOTE:When installing the the Symphony Mk II 3.10 driver you will be prompted to update firmware. This firmware update does not apply and should be ignored. Do NOT run the firmware updater if prompted. It effectively reproduces your guitar’s unique tonal qualities, and you can rest assured that you will be getting the best tonal quality.

$249

The compressor modes are really what elevate the Jam X – offering no compression at all, or three varying modes of compression, from the lowest, the Smooth Leveller, to the Purple Squeeze in the middle, and the Vintage Blue Stomp at the most extreme end, offering an ‘aggressive’ amount of compression. Compression before an amp sim can really help you shape and hone your tone, bringing new life to any existing amplifier sims you might have. The Smooth Leveller felt and sounded like a great ‘always on’ type solution, providing reasonably transparent compression, while preventing any peaks from poking through and clipping an otherwise great take. Monitoring with latency is an instant mood ruiner, making it almost impossible to record, and because of this, the Jam X USB includes a low latency mode that allows you to monitor direct from the unit, rather than after a round trip through your DAW and computer.

Jam+ combines a digital overdrive circuit, an instrument preamp, and high-quality A/D and D/A converters into a single, portable device. Apogee has engineered each component of Jam+ to provide the highest-quality signal possible with the least amount of noise - what they term pure-digital. Pressing it will engage the overdrive settings used to optimize the signals. On the other hand, the second knob engages a low latency mode that eliminates the delay which may result from recording. iPad Pro 12.9-inch (3rd generation), iPad Pro 12.9-inch (2nd generation), iPad Pro 12.9-inch (1st generation), iPad Pro 11-inch (1st generation), iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air (3rd generation), iPad Air 2, iPad Air (1st generation), iPad (7th generation), iPad (6th generation), iPad (5th generation), iPad mini (5th generation), iPad mini-4, iPad mini-3, iPad mini-2, iPad mini-1, iPad mini-1 (1st generation). All the mentioned models of iPad are compatible with Jam+. The company has been around since 1985 and has established itself as one of the industry leaders in the audio interface and converter market. The display is user-configurable. You can change the colour from 10 presets or make your own via Peterson Connect, and these colours are not just useful from a visibility point of view but allow players to assign different colours to different tunings.

$195

Whether you want to send processed or unprocessed signals, the iRig HD 2 digital USB input is up for it. This enhances your playability by giving you total control over your sound quality. Apogee’s Jam Plus is more than just great for its price – it’s great, period. It’s not the best way to record your guitar, but I find myself using it more and more because it really is the simplest way of recording a guitar. For further information on this topic, refer to our article on 10 MAJOR Difference Between Mixer vs Audio Interface as well. The Apogee products that came before the Jam series of interfaces have inspired years of riffs, songs and melodies, and the Apogee Jam X is the latest in a long line of useful, practical and well-designed interfaces. The unit plays nicely with multiple operating systems, allowing you to jump between a laptop, desktop computer or an iPad, for example, with no break in audio quality. The Jam X USB is a tool that just about every music maker needs, whether you’re equipped with a full on, home studio situation with a need for a more portable solution, or simple recording equipment that could benefit from professional-grade audio conversion and handy on-board compression. Apogee have again elevated a seemingly perfect design, reinvented in the Apogee Jam X USB Audio interface. It boasts the blend mode for low-latency recording. It offers resolution up to 24-bit/96kHz for excellent sound quality. All in all, you get a noise-free quality sound.

JAM is designed to capture the true tone and warmth of electric guitars. Perfect for any playing style and genre of music, JAM lets you record, practice, and jam with the authentic sound and responsive feel of a classic tube amp. Dynamic Microphones This is where connectors and converters come in handy. They are the tools that are used to connect to devices with no ports. Symphony Control App only available in Thunderbolt Audio Interface mode. Firmware update not required. With a built‑in analogue compressor, Apogee’s Jam X is designed to get your guitar sound right from the start. For the Jazzmaster owners Fender is going bigger with two set options – recognising that its offset model is being embraced by another new generation, while still beloved by established guitar tinkerers.

Additional Media

First things first, the iRig HD 2 digital USB input is compatible with iOS devices and PC. The devices include iPad, iPod Touch, and Mac laptops. It also comes with an audio stream input/output driver for the best experience on PCs. Of course, that is made possible with the help of USB or Thunderbolt output ports. But what if your device does not have an output port? It is seen that many traditional mixers, PCs, and other devices don’t have ports on them.