Charnwood W629 10'' Cast Iron Table Saw with Sliding Carriage

Product Information

I would have preferred seeing a belt drive rather than direct shaft drive at this price, but all things considered it is a quiet, reasonably precise bench saw which whilst fiddly to accurise, once set up is easy to use and makes accurate cuts. I use it in a professional workshop and for the money it's very good, and unlike some other similar machines from other companies, is trade rated so the motor is rated for at least an hours use per day or over 300 hours annually which is about what I use it for. Overall though for the money it's a solid and decent enough machine. I would have liked the bevel cut to be 45 degrees in both directions but you only can tilt it right. The scale is accurate when set up properly to the 90 degree mark, for all other angles. There are now 3 ways to configure the table saw. The sliding carriage can now be fitted on either side of the bladeso that you can work on the left or right. If you are not using the sliding carriage you can fit one extension table on either side of the blade or both on the right hand side or both on the left hand side.

Lathes use a rotating workpiece and a stationary cutting tool to shape metal or wood, depending on the cutting attachment.

Dust extraction from the blade cover is poor. You need a powerful extractor to make using it worth while; Table saws are made of a motorised circular saw blade that protrudes through the top of a table to cut wood that is placed on top of it. These have many functions and are used very commonly used across all varieties of woodwork. Motor (induction) Braked 2200w (3hp) / 240v, No-Load Blade Speed 4000 rpm, Minimum Blade Width (Kerf) 3.0mm, Dimensions (WxDxH) 1480mm x 1000mm x 1100mm, Weight 110Kg, Rating Light Trade, The fence needs lifting slightly to slide it without damaging the work table as the cast fence support attached to the fence can catch the table. I cleaned the table off and applied a was paste to it to prevent rust and did the same for the mitre table which by the way is excellent but a PITA to set up if you need to adjust the accuracy. Mine was pretty much spot on from the factory.

Charnwood W629 Specification: Maximum Ripping Width Using Fence 730mm, Maximum Crosscutting Width 500mm, Blade Tilt 90 – 45 degrees, Mitre Guide T-Slot Width 15/19mm, Mitre Guide T-Slot Depth 7mm, As such, please reach out to us if you require any further advice, we would be happy to assist you in fulfilling your project’s needs. Router Tables Convert a hand held portable router into a workshop machine by inverting it, and mounting into one of our router tables. Universal mounting works with any brand of router. Choose from bench top or floor standing models.In all, I am very pleased with this saw bench and would recommend it for home use or professional workshop use as there's nothing to beat it on the market at the price and the added bonus is the excellent cross cut table and fence. Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, cable and plug. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate handwheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. The main table is precision ground cast iron and also has 2 fabricated side extension tables to give impressive cutting capacities. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. Whether you need router tables, dust extractors, a morticer, bench grinders, or anything else, Kendal Tools & Machinery is thrilled to present a wide array of Charnwood woodworking machinery, perfect for any job or workshop space you may have available to you.