Coleman Connectable Tent | Connecting Tent System with Fast Pitch Setup, Blue

Product Information

All these openings are double-layer structures, with mesh and with zippered panels, so this is really a nice and functional design. Specifications Many older camper vans may have gutters, such as the Classic T2 VW camper van, which has a deep gutter running along the side of the van. More modern vans, may have a large C rail fitted, to the side of the van, which acts as a gutter type of connection. If you van has either of these, it is again, very simple to attach to your van. Each awning has a sleeve, for a pole to go through, allowing you to use a pole and clamp kit to fix your awning. ( Pole and Clamp Kit) The connectable features here imply that you can zip several of these tents side by side. The picture above shows three of them, but you can add as many as you want. In practical terms, going to more than three tents makes no much sense. Ideally, you would connect only two of them.As you realize, each of these solo tents can be used independently. Begin by setting up two tents with a suitable gap between them. Then, secure a strong rope or cord horizontally between the tents, creating a bridge-like connection. Use reliable knots to fasten the rope to the tent poles or stakes securely. It is also a handy and promising way to connect tents when camping. For this purpose, you need a larger tent and a medium or small tent. Now place the smaller tent in front of the larger tent or canopy.You can add more small tents of your choice to make and create more rooms.

If you are camping and want to join more than two tents together, then this method will correctly work for you. You will need one larger tent that will act as a centerpiece and other medium or smaller tents. Put the larger tent in the middle and then place the other small-sized tents next to the bigger one. The doors of the other tents should align with the entrance of the large tent. Use the tarps to seal the points they get connected to and close them. Camping is about bonding and having memorable moments. 5. Clip Or Zip The Doors That is why we have to give a shout out to Ozark Trail and their line of ConnecTENTs, and yes, that’s the proper way to write the brand’s name.Velcro Preparation: Attach Velcro strips along the edges of the vestibule flaps on both tents. Make sure they match up. This is a really fun tent for any situation where you want a private space at night, but a big outdoor social gathering space before bedtime. How this tent works is really simple, you clip the hooks that are located at the top front part of the tent to the top of the canopy (there is a built in slot for you to hook into). Keep It Taut: Ensure your connections, whether ropes or straps, are taut and secure to withstand wind and rain. Picture above shows awning connected directly into the van side rail, using the pre-attached Kador strip) How to Attach a Drive-Away awning to a VW Camper Van Four Main Types of Attachment

The tarp will protect you from rain and make space a little safer. You can bring as many small tents as you want and create separate rooms out of them. Make sure that the electric hook-up (i.e. where you plug into the mains) is raised off the ground to avoid damp or water ingress. We have heard them called a few different things like connect tents, connecttents, connect tent or the proper Ozark Trail brand name of ConnecTENT – but whatever you call them, they are really freaking cool and we are really big fans of what they bring to the table. For this set-up to work requires campers need to be using the same brand and style of tent. Two different models/manufacturers will not align properly, so this method would not be usable. Because these tents are custom in design to support easy connectivity, the pricecan be more expensive. An example of this type of connecting tent and the applicable prices can be found at Pod Tent USA. Once setup it will sleep up to 6 people, it will have windows on all four sides of the tent for good ventilation, has a center height of 98 inches, and a sleeping space of 10 feet by 10 feet (which is large enough to fit two queen sized mattresses).

How does electric hook up work?

The picture below shows its strong freestanding frame, you have 4 steel legs poles and 2 roof poles. This is again the Fast Pitch frame design similar to the 6-person tent presented previously above. Coleman 3-Person Connectable Tent without the fly – freestanding cabin. Thread the Kador strip from the awning directly into the groove of the wind-out awning on the rear. The roof is entirely made of mesh, as are all six openings. The cover has two vents, so almost all the features are present. I miss having a floor vent, which is necessary to keep all doors and windows shut due to heavy rain. Specifications

Tunnel Interior: This shared space can serve as a communal area, storage zone, or even a makeshift kitchen, fostering connections within your camping party. Connecting two tents together can be a breeze with Velcro or hook-and-loop strips. Here’s a unique guide to making this bond: Fitting onto a Fiamma or Omnistor will always leave a slight gap between van and awning.) How to attach to a Wind-Out Awning (Thule or Omnistor)Begin by placing two tents parallel to each other with a small gap between them. Next, suspend a tarp or rainfly over the gap using strong ropes or cords. Secure it firmly to both tents, ensuring it creates a sturdy bridge. A fitted rail on the side of your van is my preferred method of attachement, as it offers the snuggest fit from van to awning, and offers a secured fit, creating the best weather seal between van and awning. If you have a pre-attached rail of this manner, you can slide your awning straight into the rail, or you can use a fixing kit to attach it, for easier removal of the awning. ( 6m -6mm Kit) The larger area provides a less confining space for mobility especiallywhen campers must be inside due to bad weather. A pole tent serves as a canopy providing protection from heavy rain. The multiple doorways or openings of the pole tent will allow you to place your tent inside each of the pole tent’s openings. Be sure the doorway of your tent is facing inward towards the center of the pole tent. The tent itself is a unique construction. It comes with aluminum poles and two vestibules, and it has 3 entry points. This is a very reliable 4-season tent from a globally known Japanese brand.