HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

Aruba 2930F 8-port Power Supply Shelf - Mounts to the rear of the switch and provides a shelf for attaching the external power adapter X122 1Gb SFP LC BX-U transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'upstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port External inline power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 54VDC output, 180 watts - Has attached DC output cable with 4-pin polarized connector with latch Multimode OM3 LC/LC Fiber Optic cable, 30m (98.4ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km For use in the JL075A SFP⁠+ ports. Also used in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module.

X121 1Gb SFP RJ45 T Transceiver - Small Form-factor Pluggable (SFP) Gigabit transceiver using 1000BaseT technology - Has one RJ-45 1000BASE-T port - Requires Category 5 100-ohm UTP or STP cable or better RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/ 100BASE-TX: half or full; 1000BASE-T: full only CAT 5e crossover cable RJ45 to RJ45 2.1m (7ft) - Up to 1 Gigabit operation, Ethernet crossover cable with (M) RJ45 connectors on each end EN 55022:2010/CISPR 22 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438 The 8360 32Y4C model requires configuration of interface groups only for ports 1-4 (as group number 1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers.Multimode OM3 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km X132 10G SFP+ LC ER transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 40km (24.9 miles) on OM3 fiber cable - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY

CAT 5e cable RJ45 to RJ45 1.2m (4ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each endDual Core ARM Coretex @ 1016 MHz (48G models) or Dual Core ARM Coretex A9 @ 1016 MHz (8G/24G models) speed is NOT supported for the J8177D or JL747A when used in any port (SFP+, SFP28, or SFP56) on the 6400 series. UL 69050-1: 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2014 / IEC 60825- 1:2014 Class 1 For J9537A, J9549A, J9535A, and J9637A modules: K.15.02.0004 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007