Cisco Meraki MR76 Wi-Fi 6 Outdoor AP

Product Information

The MR76 provides a maximum of 1.7 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing. Omni directional antennas are best for pole mounts applications and for mesh networks. Use omni directional antennas when designingto cover 360 degrees around the Access Point.

All dual-band 2×2:2 outdoor APs (such as the MR74 and MR76) have two sets of mount points: the top two are for the 2.4GHz radio, the bottom two are for the 5GHz radio. Rules and conditions for the sale of equipment are determined by the terms of contracts concluded by Cisco or authorized Cisco partners with equipment buyers. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.The equipment is not for domestic use. The equipment is intended for operation without the constant presence of maintenance personnel. Omni directional antennas are best for pole mounts applications and for mesh networks. Use omni directional antennas when designing to cover 360 degrees around the Access Point. Sector Antenna

Sector antennas are ideal for building mounts as they target the signal away from the interior spaces of the building and focus the energy to the larger outdoor space. This antenna is ideal for exterior building use but may also be used for some mesh network designs. Patch Antenna Sector antennas are ideal for building mounts as they target the signal away from the interior spaces of the building and focus the energy to thelarger outdoor space. This antenna is ideal for exterior building use but may also be used for some mesh network designs. Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 34mmbetween the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Details that matter

Disposal of a technical device at the end of its service life should be carried out in accordance with the requirements of all state regulations and laws. Sector/patch antennas have two connectors. Both of these connectors must be attached to the same radio, a single sector/patch antenna should not be attached to both the top and bottom of the access point

Meraki offers a number of antenna options for the MR76 access point. Below is a highlight of the different antenna types and their applications. It is always best practice to consult with a Cisco SE or Partner in to select the best antenna for the unique design. Omni Directional

You may also like…

WEP**, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)** ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.