SP Fan, Multicolor, Single

Product Information

having things away from the fan will make it quieter ied say up to an inch at 100% but depends on fan. its like taking a fan and putting it flat on the table it will make noise and lift it tell the noise reduces Fan rotation speed is one of the most significant factors when investing in a new fan. RPM shows the exact speed of your fan. The higher the number, the more air goes through your fan, but more noise is generated.

https://www.corsair.com/ca/en/Categories/Products/Fans/sp-series-rgb-led-config/p/CO-9050059-WW#tab-tech-specs Either let iCUE automatically detect your Corsair fans, or manually select the appropriate product. At the bottom of the screen, you will see two items labelled Lighting Channel 1 and Lighting Channel 2. These are the two connectors on your Lighting Node Pro or Commander Pro labelled LED 1 and LED 2 that correspond to these. Select the drop-down box next to the Lighting Channel you have your devices connected to, and switch them to either SP RGB Fans, HD RGB Fans, LL RGB fans, ML RGB fans or Lighting Strips. So if you were to use fan B on a radiator as an exhaust (basically no restriction in the front of the fan), shouldn't it work better than the static pressure fan? I say this because both of the fans are still moving AIR which has the same density...etc. Since fan B is able to move the air faster to begin with, shouldn't the air be able to push through the fins of the radiators more effectively than the static pressure fans? The Corsair ll fans deliver an amazing performance. They support RGB lights which can be adjusted via the ICUE software. Above all, they are rated as quiet fans since the sound levels are around 24 dBA. ConclusionHowever, when we start adding resistance to the fan, the table starts to shift. Any fan specification you see shows a volume of air (CFM or other) the fan can move when unhindered, in free air sitting on your desk. There is always some resistance. The moment I put an AF fan on my case, it is no longer capable of moving 63 CFM at 1650 RPM. It will move less. How much less? No way to know exactly without some precise equipment. Every case and environment is slightly different, but for the most part the volume is not substantially less. Your front grill provides some measure of resistance and the AF fan may only move 57 CFM at 1650 RPM. However, that is certainly more than the 40 CFM an SP120 can move at the same 1650 rpm. The SP fan is less affected by the resistance, but the airflow on the AF is still so much higher and it is the better choice. Another thing to consider is static pressure. Static pressure is the ability of a fan to push air through different environments such as filters, radiators, etc.

As shown in the picture above, a duty cycle is how long the signal is turned on versus turned off. For instance, a duty cycle of 100% means the signal is always on. NOTE: If you connect 6 QL fans and 4 RGB LED strips to the Lighting Node Pro, you will only be able to select and customize the fans in iCUE. As such, it provides more options for customization and lighting. LEDs are placed on both sides of the fan. So, you can illuminate both the inside and outside parts of your computer case.For instance, Corsair LL’s speed ranges from 600 to 1500 RPM. In this case, the LL model can lower RPM to 600 when the load is low. But, the Corsair QL can lower it to 525, which is better for energy-saving and noise reduction.

The minimum RPM for the QL model is 525. On the contrary, the minimum rotation per minute for the Corsair LL is 600. The sound level of the Corsair LL is 24.8 dBA. The Corsair QL has a higher sound level which is 26 dBA. To assign lighting to your fans or strips, select the fan series you want to edit on the left menu.

if youre installing a fan in a very restrictive place, like in front of a bunch of hard drives, then a SP fan will perform better because it will have higher CFM at high mmH2O compared to the AF fan