SP CONNECT Bike Bundle II Universal Clamp

Product Information

According to our tests, frequencies in the range of 30-60Hz cause the issues. Actual peak frequencies can vary depending on the weight and setup of the phone mount.

The RAM universal X-Grip mounts are popular with many (including road-test legend Simon Hargreaves), but they’re far from a subtle design, and some users report the phone’s buttons being pressed by the mount’s arms. We have had reported issues with all brands we make phone cases for. However, other than with Apple, there have been too few issues with the other brands to name any model or brand as being at risk. The SP Connect Charging Anti Vibration Module includes the company’s vibration damping system (details below), and is made from machined aluminium that’s well sealed against the weather. Is it more of a problem with some devices than others due to the construction of the optical image stabilisation (OIS), and if so, what is the difference in the devices?

The maximum acceleration occurring is reduced across the entire spectrum. This means that the peak values of all vibration frequencies are reduced, not only in the range of 30-60Hz. The vibrations from the motorcycle engine cause the impairment – the vibrations from the road are not an issue as they are too volatile.

As with any case, dust will still collect inside, so it’s worth popping your phone out every so often for a clean. The interior has a soft fabric to protect your device, but grit around the edges will, inevitably, cause some marks eventually. I’ve yet to see any phone case that avoids this. Remember I said how I’d dropped my phone off the bike? It was mounted to the S1000XR I owned then – so about a meter and a half off the ground – and while riding at a good 60mph the phone was suddenly waving in front of me, attached to the USB cable that was charging it. Before I could react, it disappeared behind me and bounced down the road. After using SP Connect for almost four years on a very wide variety of bikes, the only time I had an issue was after mounting my Galaxy S20 directly to the bars of a Kawasaki W800 using the Universal Mount. When I stopped to take a picture, the camera was shaking continuously and couldn’t settle but after restarting the phone it was cured.

Design Your Own Disclaimer

I really can’t stress enough just how much slimmer the SP Connect SPC+ case feels, and I should point out too that the buttons are very easy to press still, thanks to slots cut around them that help them move easily – a pricey ZAGG case I had before was much more intrusive thanks to a less considered design. The quality of the image provided by the customer must meet print standards to ensure a high-quality final product. You will be alerted if the quality is insufficient. Tests conducted on motorbikes showed that they experienced acceleration forces of up to 4G, and our laboratory tests were conducted with forces of up to 7G. Our Anti Vibration Module was first released in July 2020. It was developed internally with consultancy from an external team of frequency specialists. The tests were carried out in the laboratories of the FH Wr. Neustadt (University of Applied Sciences - Austria).

At SP Connect, we are proud to offer high-quality print-on-demand services to our customers. However, we are also responsible for ensuring that the content we produce is in line with our values and legal standards. We appreciate your understanding and assistance in helping us to maintain these standards. So we ask all of our customers to comply with this disclaimer when using our services. When fitting you’ll need to decide whether you want to have your phone in a horizontal or vertical position, as apart from on the universal mount, you can’t change it without unscrewing it due to the way the phone attaches with a 90° twist. Most of the mounts have adjustment in 6° increments, so you should be able to get your phone to sit straight to most parts of the bike. The new case design is noticeably slimmer, and comparing the Samsung Galaxy S21 SPC case with the new SPC+, it’s obvious how much more compact it is.

The system sold millions of times.

Problems with my Pixel 7 Pro’s wireless charging are very noticeable here, and I have seen it losing power despite being correctly mounted while using Google maps. As I haven’t been able to find a cure yet, I wouldn’t recommend this for a Google phone (and would be cautious when buying any wireless charger). This does not appear to be a problem related to the SP Connect cases, or specific to the Charging Suction Mount, and the wireless charger with hard wire kit I have on the bike is fine with the Google device. Peak Design has a small selection of motorcycle mounts for its range of phone cases, though some of the prices are quite high. Fitting an SP Connect SPC+ mount to your bike will vary depending on which you’ve bought, but generally it’s a simple process that just requires one or two Allen keys (which aren’t supplied in all the kits).