QNAP TS-h973AX-32G 9 Bay Desktop Hybrid Storage NAS Enclosure - 32 GB RAM, AMD Ryzen Quad-Core, 2.2 GHz Processor - Supports U.2 NVMe SSD and 10GbE/2.5GbE Connectivity

Product Information

Cloud storage gateways realize hybrid cloud applications by working with the cache space reserved on NAS to ensure low-latency data access to the cloud. Note: At least 4 GB RAM is required. The maximum number of channels supported varies by NAS model, network configuration, and camera settings. For more information, visit https://www.qnap.com/go/qvr-nas-selector. Note: The application is available in the App Center and in virtual appliance marketplaces (VMware vSphere ESXi and Microsoft Hyper-V).

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. There is an additional 2x SATA SSD bays that, once again, are plastic and screwless in their design. drives in all of these bays are held in place by plastic clips that line-up directly with the screw holes inside each bay. This is by no means mandatory and the TS-h973AX arrives with more than enough screws for 2.5/3.5″ media to be more rigidly installed if you prefer. The SATA SSD installed in these bays are generally regarded for use as additional cache towards the hard drive storage array, allowing their high performance and IOPS benefits to be passed on to the larger, more affordable, but slower hard drive RAID array. Space Saving Efficiency – Inline data deduplication, compression, and compaction reduce file size to conserve storage capacity and optimize performance.Then you have KEY applications that are used on the QNAPNAS system that moves into tailored data access and use, such as:

The actual number of virtual machine instances may vary by the memory installed on NAS (e.g. 1 VM= 1 thread for 1 vCPU and 1GB memory). Please expend memory if needed. Install high-performance U.2 NVMe PCIe Gen 3 x4 SSDs or SATA 6Gb/s SSDs in the dedicated SSD slots for cache acceleration and improved random I/O.Ventilation throughout the device is taken care of in a few small ways. The storage bays have sufficient spacing around them to allow air to pass over the storage media, internal PCB and heat sinks. There is the large rear fan we will talk about in a bit and there are ventilation holes on one side of the chassis and across a large area of the base. While the QuTS hero software is laden with advanced features, the learning curve is gentle as it looks and feels very similar to the standard QTS firmware. That said, we spotted one difference right away: our three 14TB Seagate IronWolf NAS HDDs were assembled into a 24TB RAID5 storage pool in five minutes, while the job could have taken a day under QTS. An AI-powered photo management app, supporting automated photo categorization with AI Albums, iOS® Live Photo display, and powerful search tool for ultimate photo management and sharing solution. QTS is the operating system for entry- and mid-level QNAP NAS. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. System

Host multiple virtual machines and containers to run a wide range of applications on the TS-h973AX. Internally, things are kept tidy and well-spaced. Removing all of the available storage trays shows us a very clean selection of media interfaces. No loose cables, no separate data and power connectors, things are very structure inside this system. Note: At least 1 GB RAM is required. The maximum number of channels supported varies by NAS model, network configuration, and camera settings. For more information, visit https://www.qnap.com/go/qvr-nas-selector.RAID Z – Multiple RAID levels allow flexible capacity utilization. RAID Triple Parity and Triple Mirror deliver higher levels of data protection. Above are a few of my software overviews that cover the general GUI and system of QuTS Hero on the TS-h886, as well as RAID rebuild and storage management overviews of the system to give you some idea of what the TVS-x88X can and cannot do:

QTier – The QNP intelligent, multi-layer tiering system that works to optimize your SSD and caching configurationLikewise, although the system features other arguably more pedestrian Ethernet ports, even these are 2.5 GbE each, meaning they are are 2.5 x the performance bandwidth available compared with traditional ethernet. These 2.5GbE ports also support trunking / link aggregation, which means that the system can combine these ports together to create a 5GbE (500MB per second) connection to be used in conjunction with the 1000MB per second port previously mentioned. Overall, that is a huge amount of performance available externally and this in conjunction with the triple-tier storage available and higher performing ZFS file system is a hugely ambitious and impressive architecture at this price point. QNAP TS-h973AX NAS Review – Internal Hardware vJBOD and Hybrid Mount – Gives you the ability to mount cloud storage as a visible drive within the NAS (and the apps access it as if it was local) or mount a % of space from your NAS onto another as a virtual chunk of space to use QuMagie – Facial and Thing recognition application to help you retrieve, tag and catalogue photos by its use of AI to actually ‘view’ all your years of photos and let you search by the contents of them, not the file names.