ZDOZITZ Trim Puller Pry Bar - Skirting Board Removal Tool, Removal Multi-Tool for Skirting Board, Baseboard, Molding, Siding and Flooring Removal, Remodeling

Product Information

Once you’ve removed all the skirting, remove any screws, nails or other debris left behind. Always use a screwdriver to remove screws, but pliers and claw hammers can be helpful options. This multi-sander is also popular for its durability. It is built with sturdy materials. Moreover, its handle is soft-grip. It makes it comfortable while using, even during long working hours.

Three predominant methods emerge in the pursuit of reviving skirting boards: employing a heat gun, utilizing a chemical stripper, or opting for the manual sanding technique.Insert the crowbar carefully between the wall or floor and skirting board, and gently pull away from the wall. Continue this step all along the wall at 6-10 inch intervals until the skirting has been detached. Don’t have a crowbar? Don’t worry, you can also use a chisel and hammer. However, a crowbar is more effective. Though the idea of removing skirting boards seems relatively simple, it’s important to know how to do so without damaging the plaster -or the walls! There may be a number of reasons calling out for a change like general home renovations, worn surfaces, or a new decorative style. In any case, it's important to understand the steps, which is why we've put together this handy guide to show you the whole process! You can also adjust its speed with ease. It can go from 210 – 440 meters in a minute. You can choose a higher speed if you want to ensure fast-paced work. If decorators' caulk has been used to fill any gaps, get a Stanley knife and carefully run the blade between the skirting and the wall to cut through the caulk.

You'll likely find that the existing skirting will have been nailed, screwed or glued (or a combination of these methods may have been used) to the wall. A random orbital sander is also much more flexible in comparison to the other models. They work well on both flat surfaces as well as rough edges. Multi-Tool Sander Before covering them, ensure skirting boards are free of dust and dirt. A clean surface ensures that masking or painter’s tape adheres better. Either try to unscrew them with a screwdriver or break through the moulding with a drill and chisel before using a claw hammer to pull out the nails from the wall.

Elevate your skirting boards

Water damage –In the unfortunate event that a room has suffered from a leak and there is water damage to the wall or floor, it’s likely skirting boards will need to be removed to conduct repairs. This will especially be the case if changes need to be made to plumbing outlets or electrical systems that are located behind skirting boards in the wall.

Radiator pipes often run across the skirting boards, especially in older properties. Rather than working around the pipes, it’s easier to ask a professional plumber to remove your radiators until your skirting boards have been replaced. Using the metal scraper or putty knife, gently peel away the paint, working methodically across small sections. It is also advised to only use the crowbar where the wall studs are situated so that the plaster has less chance of getting damaged.

Tools required for removing skirting boards

Once you’ve determined the optimal heat setting, direct the heat gun towards the skirting board, maintaining a distance of about an inch. If you’re using a roller, which can splatter, consider using a paint shield or guard. This tool is a barrier, preventing paint from touching surfaces you want to protect.