Kreg Straight Edge Guide XL-8 Ft

Product Information

An easy way to upgrade this board, and number two on our list, is to attach a second board perpendicular to the straightedge—flush with its end. If combined with the rear clamp with appropriate fittings, it will allow you to control your woodworking processes with great flexibility. Key Features: Straight edge clamps are usually of aluminum. You will find straight edge clamps made of extruded aluminum, rigid enough for holding the straight edge. It can also withstand constant use. The width of this aluminum is up to three inches to resist bowing.

Circular saw guides come in several different lengths and widths. The larger ones are geared towards professional woodworkers, while shorter and narrower ones are better suited for everyday DIY home improvement tasks. A good circular saw rail will ensure that you never make a mistake when cutting material. With a guide rail, an amateur DIYer can make straight cuts with uniform depth that professionals who have been using circular saws for decades would struggle to make. Prevents splinters and tears on material If someone suddenly enters and something happens, it will be fatal. And you are working with blades. Any accident will take a huge toll. Most straight edge clamps are designed with ease of use in mind. Straight edge clamps feature clamping mechanisms with large levers that allow the user to easily tighten the clamp into place on a large piece of material.Hey there, let’s get cutting! You got your circular saw, your safety gear, and the blade is all set. Let’s make that straight line! If you’re feeling confident, and you’ve got everything lined up properly, you can now turn on the saw and get started making that cut you planned. Length: The length of your straight edge will depend on the size of your saw and the size of the material you're cutting. Make sure to measure your saw's base plate and the length of the material you'll be cutting to ensure you get the right length.

Last but not least, make sure the area you’re working in is well-lit. You don’t want to be caught in the dark, your project ruined and you in danger! So there you have it folks, I’ve made sure you’re well equipped with safety information to make sure your cut is a piece of cake. So be safe and have fun! Make Sure Circular Saw is Unplugged When you’re cutting plywood or other sheets, making a straight cut is even more challenging because the cuts are so much longer. So, you need something that will guide the saw over 4′ to make a crosscut across the sheet, or 8′ to make a rip cut along the sheet’s length. Line up the straight edge guide along the marking of the base plate and clamp it on the board according to the markings you made. Step 5One of the most significant benefits of the BORA system is its ability to reduce tear-out. The two rolls of 55-inch Self-Adhesive Non-Chip Strip included in the set help to prevent top edge tear-out and splintering. Attaching the non-chip strip to the bottom of the NGX clamp edge provides a smooth finish and ensures that your cuts are clean and precise. If the saw begins to feel too unstable when cutting, make sure that you have a solid, flat surface to stand on. As a bonus safety tip, a pair of steel-toed boots are highly recommended. Again, I know this isn’t a major issue for most people, but it is still an advantage worth noting. On its own, it may not mean much, but when combined with the other advantages, it might convince some of the value of using a guide rail. Cons

Clean Cut: The edge of the guides ensures adequate leveling. You can simply hold your saw against them to generate a clean edge.The NGX 50-inch clamp edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. For larger projects, the NGX 50-inch aluminum extension can be added, increasing the length up to 100 inches. This provides a cutting capacity of 100 inches, making it suitable for any project, big or small. Mark the end of the circular saw base plate on the wood by the side of the edge and measure the distance between the line of cut and the end of the base plate of the circular saw. Step 3 Place the circular saw, and align the blade of the circular saw with the cutting line to see if the alignment of the edge guide is perfect or not. If it’s not, the cut will not be straight. If the alignment is not the same, follow the process again and mark more carefully using the speed square. Step 6

Before jumping into the how-to part, it’s important for you to know the tool you are about to use. So, here’s a little introduction to a straight-edge guide. Time-Saving: The clamp can save time. You can adjust it up to 24 inches. However, the wood board will not be affected by this procedure. Cutting a straight line through plywood with a circular saw seems easy enough, but it rarely comes out as straight as it feels while you’re making the cut. To get better results here are three easy ways to create a guide for your saw. 3 Ways to Make a Guide for a Circular Saw 1. Use a Board as a Straightedge Portable cutting guide: As it is compact, you can carry this guide anywhere instead of carrying heavy tools for your saw. One of the key features of the BORA Clamp Edge is its ability to clamp firmly onto the material being cut. With a wide rubberized clamp face, this guide ensures a tight non-slip grip that won’t leave indentations or marks on the material. The clamp is also easily adjustable, making it simple to customize the guide's length to meet the specific requirements of any project.For example, using a guide rail can help prevent splinters and tears on your material. This is especially noticeable around the edges of whatever material that you are cutting. For some, this won’t be as important of an advantage as the improved accuracy, but for others, this feature will come in very handy. Keeps your work surface undamaged Most straight-edge clamps feature rubber feet for gripping the material. These rubber feet help prevent damages to the material. Moreover, the clamping mechanism works well in resisting the pressure that the straight edge receives from the saw. Swivel Heads Alright folks, listen up! Before you start any manual sawing business, you’ve gotta make sure that your saw is unplugged. Yeah, you heard me right. Make sure that you unplug it before you get ready to cut. It’s really important and might save your life.