Crafts 4 All Permanent Fabric Laundry Marker, Non Bleed, Dual Tip, Black, 2 Piece

Product Information

In a perfect world, all your dye projects would be permanent, wash-fast, and live a long and vibrant life – but of course, sometimes there are snags. Fiber-reactive and acid dyes both chemically bond to the fibers they’re designed to dye, so these dyes will yield a permanent color on your fabric. However, years of regular washing and wearing will fade even the strongest of dyes, so the definition of ‘permanent’ in this case is still relative. Store your dyed items away from direct sunlight and wash them in cooler water in your washing machine to prolong their life. After this has dissolved, add the cup of pre-mixed dye in the same way – pushing the fabric to the side to avoid pouring it directly. This helps to avoid dark splotches. Mix thoroughly. You can swish a bit of extra hot water in your dye cup and add it to your dye bath to make sure you get it all. Step 7: Stir frequently until the dye is absorbed. Turn off the heat. You may notice some color running the first time you wash a garment dyed with these dyes, but this is most frequently because the post-dye washout wasn’t thorough enough. Be sure that when you wash out the dye, you keep going until the water runs clear! This will limit the risk that a freshly dyed item may accidentally stain something else that it’s washed with. Synthetic fabrics like polyester, nylon, or rayon require a different type of dye called disperse dye. These dyes work by penetrating the plastic fibers and coloring them from the inside. They provide a uniform and even color, but it may not be as intense as with fiber reactive dyes. Look for a fabric sealant spray specifically designed for use on fabric markers or pens. Wash garment before wearing to test durability

Dry the fabric completely before dyeing. You can use a dryer or hang it outside in the sun. It’s important to make sure the fabric is completely dry to avoid any uneven dyeing. Once the desired color is achieved, rinse the item thoroughly with cool water before washing it separately from other items. Apply the DyeDye activator: Citric Acid or White Vinegar (from your local supermarket, both work equally well) for protein fibers, or Salt and Soda Ash for cellulose fibers. Put a dust mask on before you open the jar of dye. Most powder dyes are lung irritants, so be safe. Before you begin, make sure you are working in a well-ventilated area. Fabric pens can emit strong fumes, so it’s important to have proper airflow to avoid inhaling any harmful chemicals. Open a window or work near a fan to ensure a safe working environment. Place paper or cardboard inside garment to prevent bleed-through

Pre-wash and dry your item using detergent. If you’re dyeing an existing garment, be sure to treat any stains as these could take the dye differently. Step 2: Record the weight of your dry itemPreventing future bleach stains on your clothes can be easily achieved by being mindful of the cleaning products you use and their potential to interact with your clothing. Here are some tips to help you avoid bleach stains in the future: Stir the garment continuously for 10-15 minutes to ensure the dye is evenly distributed and fully absorbed. Rit recommends using twice the usual recommended amount of dye for the weight of your fabric, and doubling the recommended time it spends in the dye bath, as well as using the post-dye Color-Stay Dye Fixative. Supplies: If the bleach stain is particularly stubborn and the color doesn’t fully cover it with one coat, don’t worry. Simply apply a second coat after allowing the first coat to dry completely. This will help intensify the color and ensure better coverage. Touch up periodically as needed Be sure to rinse your coat after dyeing thoroughly. To dry, lay your coat out flat on a towel, then roll the towel up into a towel-snake. Roll this towel-snake up again into a little spiral, and squeeze it (or kneel on it!) to extract excess water. I call this the cinnamon roll method. It’s useful for items that are too delicate to wring. Once you’ve cinnamon rolled your coat, you can either lay it on a fresh towel to dry or hang it on a hanger – it shouldn’t be dripping wet at this point. Keep it out of direct sunlight while it dries.

Wash the fabric thoroughly using a mild detergent and warm water. Avoid using fabric softener as it can leave a residue that will hinder the dye absorption. Maintain the temperature and stir frequently until the dye is absorbed. You’ll want to pay extra attention to the dye bath (agitating constantly and monitoring the temperature) for the first 20 minutes, but after that you can taper off, turning down the heat and stirring less frequently for a few hours. You can turn off the heat and allow it to sit overnight if required.It is recommended to follow the manufacturer’s instructions for the specific pen you have chosen. Heat set with an iron on medium heat Optional: Kitchen scale (gram increments) and mini scale (hundreths of gram increments) and a thermometer. Finally, I’d recommend at least one run through your washing machine alone (without anything you’re worried about staining) to be sure all the dye has washed out. Use alternative cleaning agents: Bleach isn’t the only cleaning agent out there. Consider using alternatives such as hydrogen peroxide or vinegar, which are less likely to cause bleach stains. So, take a moment to blend the color and admire your handywork! Setting and Sealing the Fabric Pen Allow the marker to fully dry