G-Paint 8 Pack - Golf Club Infill Paint - Black - White - Red - Blue - Yellow - Pink - Green - Orange Paint Fill Numbers Letters, Logos onto Existing Golf Club Graphic

Product Information

Once it has soaked-in the paint remover, use a nail, or any object with a pointed edge to scrape the paint from the golf club and out of narrow or hard-to-reach areas, like letters and edges. Allow the paint to dry ( 30 TO 40 minutes) Use sandpaper to ensure a smooth, shiny surface, repeat the process at least 4 times. Making sure you are wearing latex gloves use a sharp metallic object to scrape the old paint off the club heads. Use a nail to remove paint from the letters, edges and, difficult-to-reach places. Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run. Cover the other parts. The club head and the golf club grip may be covered with painter’s tape so that paint does not get on them.

Once the paint has been applied to the required area using your preferred method, allow the paint to dry With all three methods it will be necessary to smooth out and remove excess paint and clean up any spillage onto the clubs ensuring that the paint remains only in the area you want to fill. The reasons for the painting of golf clubs can be to repair chips on a driver, paint the complete shaft or, Custom paint fill.

available in our online store!

Irrespective of what purpose you are using the paint for, there are several steps that have to be followed before applying the paint. Materials Required Some preparation is required before it’s time to paint your golf clubs. There are two vital aspects that need to be taken care of before any painting can begin: Enamel Paint. Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Take a metal bowl and pour acetone into it. Wear gloves made of latex as a precaution before you transfer the acetone. Place your putter in the metal bowl filled with acetone. Make sure all parts of the putter that you want to be painted are submerged well in the acetone.

Paint Remover. Acetone can be used. Make sure that strong latex gloves are worn to protect your hands. Once you have taken the masking tape off, very carefully remove any unwanted paint from the club using acetone-soaked q-tips. Clubheads must be left to dry for at least 24 hours before being ready to use. How to Customise your Golf Clubs Once you are sure the primer is dry and cured, make sure you have a smooth even surface with the use of micro-fine sandpaper. Apply a thin, even layer of epoxy-based enamel paint using a spray can or spray gun. When removing excess paint. Wrap a cleaning swab soaked in acetate around a razor blade or any flat straight object. Rapidly wipe the swab over the area. Replace with a cleanly soaked swab if dirty. Repeat these steps until the club surface is completely clean. Do not use Q-tips as they can cause an indentation on the surface of the paint.When looking for suitable paint to repair chips, scratches or, scuff marks, it is essential to choose a paint that will withstand the heavy impacts that all golf clubs will encounter.