PetSafe Microchip Cat Flap, Battery Powered Pet Door, 4-Way Locking and Easy Installation, 2017 Version,White

Product Information

Finally, remember that your cat won’t want to reach up too far to get in and out of the cat flap. Make sure you install it at a suitable height for their legs. If you would like to learn more about this cat flap, read our full SureFlap Microchip Cat Flap review.

With its advanced selective entry technology, our PetSafe® Microchip Cat Flap has been designed to allow your cat easy access to the outside world whilst keeping other troublesome cats and animals out of your house. Using radio frequency identification (RFID) technology, it works by reading your cat’s unique microchip ID without the need for a collar or accessory. Press the red and green button at the same time for 2 seconds. Both lights will flash and the door will beep. It’s a really simple cat flap to programme, with just the push of a button and an LED indicator that flashes to let you know the microchip has been registered. You will need four AA batteries to power the cat flap, but users report that these last for around a year, making the Cat Mate even better value.If you have more than one cat, the above method will change the scanner side for all cats. For multi-cat homes, adjust the read range as follows. You will need someone to help you with this step. With its advanced selective entry technology, our PetSafe® Microchip Cat Flap has been designed to allow your cat easy access to the outside world whilst keeping other troublesome cats and animals out of your house. Setup is easy, with one-button programming. However, this flap is marginally slower to open than some others and this may take your cat a little while to get used to, so be patient. The cat flap has a green light that appears when a chip is read successfully, and the LED light will also indicate when the battery is running low. Powered by four AA batteries, battery life is impressive at around 12 months. Cut-Out Size: The hole you cut in your door to install the door. After installation, you can get this measurement again by taking the pet door out. Close

Press both buttons together. The cat flap is now in test mode. The red light will flash when it detects a microchip, and the green light will flash when it recognises your cat's microchip. Your pet door has two major parts: the frame and the flap. The inner and outer parts of the frame fit together in the cutout to hold the flap in place. The flap is the part that covers the cut-out hole in the door, the part your pet goes through to use the door.If your cat has a Bio Therm (temperature reading) chip, this is not compatible. These chips can sometimes stop working. Some examples of Bio Therm numbers include 985 140 000123456 and 985 141 000123456. Microchipping your cat by inserting a tiny chip into your pet is one of the easiest ways to keep it safe. The chip can then be read by a portable scanner, should your cat ever go missing and end up at a vet practice. It’s not harmful to the cat and takes very little time. Adjust the read range to the side where your cat’s microchip is. For example, if the chip has moved to your cat’s left side, set the microchip scanner to read your cat’s left side. However, you won’t get all these features without the hub, and this needs to be plugged into your router with an Ethernet cable as well as into the mains. You will also need four C cell batteries, which you should expect to last a maximum of six months.