TP-Link Deco X50 AX3000 Whole Home AI-Driven Mesh Wi-Fi 6 System, Dual-Band with Gigabit Ports, Coverage up to 6,500 ft2, Connect up to 150 devices, 1 GHz Dual-Core CPU, HomeShield Security, Pack of 3

Product Information

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Why the actual wireless speed on my wireless device is lower than the speed result on the Deco APP? 08-02-2022 165922 All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time. Use of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, HE160 and BSS Color require clients to also support the corresponding features. The 160 MHz bandwidth may be unavailable in the 5 GHz band in some regions/countries due to regulatory restrictions.

TP-Link has one of the best apps going, and some of the best features. While many router manufacturers require you to pay for parental controls, such as with the Eero 6 Plus, TP-Link bundles generous free controls.The system claims a throughput of up to 574Mbits/sec on the 2.4GHz band and 2.4Gbits/sec on the 5GHz band. Premium meshes and routers often promise double that rate, although that doesn’t mean they’re literally twice as fast. A fat 160MHz channel width helps the Deco system overcome physical obstacles and interference from other networks. Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer, het draadloos bereik en aantal verbonden apparaten kunnen niet gegarandeerd worden en variëren op basis van netwerkomstandigheden, clientbeperkingen en omgevingsfactoren met inbegrip van bouwmaterialen, obstakels, omvang en dichtheid van het verkeer en locatie van de client. The Deco app also works as a smart-home hub, offering one-touch controls for TP-Link’s Kasa appliances, plus integrations with Philips Hue and Samsung SmartThings. I suspect most people already have this covered through the Alexa or Google Home apps but the simple automations could be useful, allowing you to set network events as triggers for IoT actions. READ NEXT: The best wireless routers you can buy TP-Link Deco X50 mesh router review: Price and competition The TP-Link Deco X50-5G is an AX3000 Wi-Fi 6 system. Its 5GHz band runs at a maximum speed of 2402Mbit/s and its 2.4GHz band at a maximum of 574Mbit/s. That’s relatively mid-range by today’s standards.

To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) Voor het gebruik van wifi 6 en functies zoals OFDMA, MU-MIMO, 1024-QAM, HE160 en BSS Color zijn clients vereist die deze functies ondersteunen. De bandbreedte van 160MHz is mogelijk niet beschikbaar op de 5GHz-band in sommige regio's/landen vanwege wettelijke beperkingen. And the Deco design has its strengths. Upload speeds aren’t bad at all, while the HomeShield and smart appliance integrations add usefulness. Three Ethernet ports per unit is a welcome provision too. Looking a little like a fancy vase thanks to its plastic case wrapping around the side, the TP-Link Deco X50-5G is a neat and relatively compact router. It’s a touch light on Ethernet ports, with only two Gigabit Ethernet ports and one 2.5 Gigabit Ethernet port at the rear. The internet connection is unstable or suddenly stops working when connected to the Deco network? 07-12-2023 851855

Leert op intelligente wijze de netwerkomgeving te herkennen om wifi te bieden die is afgestemd op je woning Insights) можете да проверявате кои сайтове посещават вашите деца и колко време прекарват във всеки от тях. Това е чудесен начин да знаете, че вашите деца са в безопасност и че се забавлявай онлайн. Gbps internet speeds require compatible service plans and equipment. 2.5 Gbps and 1 Gbps ports cannot be concurrently configured as WAN ports.

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process Use of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, and BSS Color require clients also to support the corresponding features.