Joined in 2023 
82 
63 About this deal
All DisplayPort cables are compatible with all DisplayPort devices, regardless of the version of each device or the cable certification level. [42]
The Mini DisplayPort connector was developed by Apple for use in their computer products. It was first announced in October 2008 for use in the new MacBooks and Cinema Display. In 2009, VESA adopted it as an official standard, and in 2010 the specification was merged into the main DisplayPort standard with the release of DisplayPort 1.2. Apple freely licenses the specification to VESA. In accordance with The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 we would like to make you aware of the following important information: DisplayPort 1.1 added optional implementation of industry-standard 56-bit HDCP ( High-bandwidth Digital Content Protection) revision 1.3, which requires separate licensing from the Digital Content Protection LLC. [8] :§1.2.6
I have not compared switch latency to Display Port, so would be curious if anyone here has impressions
The latest display connectivity standards are DisplayPort and HDMI ( High-Definition Multimedia Interface). DisplayPort first appeared in 2006, while HDMI came out in 2002. Both are digital standards, meaning all the data about the pixels on your screen is represented as 0s and 1s as it zips across your cable, and it's up to the display to convert that digital information into an image on your screen. Two 4K × 4K ( 4096 × 4096) displays (for AR/VR headsets) @ 120 Hz and 10 bpc (30 bit/px, HDR) RGB/Y′C BC R 4:4:4 color (with DSC)The stipulation that the DP_PWR wire be omitted from standard DisplayPort cables was not present in the DisplayPort 1.0 standard. However, DisplayPort products (and cables) did not begin to appear on the market until 2008, long after version 1.0 had been replaced by version 1.1. The DisplayPort 1.0 standard was never implemented in commercial products. [46] Resolution and refresh frequency limits [ edit ] DisplayPort cables differ in their transmission speed support. DisplayPort specifies seven different transmission modes (RBR, HBR, HBR2, HBR3, UHBR 10, UHBR 13.5, and UHBR 20) which support progressively higher bandwidths. Not all DisplayPort cables are capable of all seven transmission modes. VESA offers certifications for various levels of bandwidth. These certifications are optional, and not all DisplayPort cables are certified by VESA. Has anyone else experienced this issue before? I can't figure out what about it won't let the other monitor work, when they were both in use before. I've tried a new DP to DVI cable, I even got a new DP to DVI adapter and ran it through that and a DVI cable. According to a roadmap published by VESA in September 2016, a new version of DisplayPort was intended to be launched in "early 2017". It would have improved the link rate from 8.1 to 10.0 Gbit/s, a 23% increase. [29] [30] This would have increased the total bandwidth from 32.4 Gbit/s to 40.0 Gbit/s. However, no new version was released in 2017, likely delayed to make further improvements after the HDMI Forum announced in January 2017 that their next standard (HDMI 2.1) would offer up to 48 Gbit/s of bandwidth. According to a press release on 3 January 2018, "VESA is also currently engaged with its members in the development of the next DisplayPort standard generation, with plans to increase the data rate enabled by DisplayPort by two-fold and beyond. VESA plans to publish this update within the next 18 months." [31] At CES 2019, VESA announced that the new version would support 8K @ 60 Hz without compression and was expected to be released in the first half of 2019. [32] DP 2.0 configuration examples [ edit ]
DisplayPort (DP):The best connector for an audio and video signal, and can transmit 144Hz up to 4K. You will likely find that your new Ultra HD/4K TV supports HDCP 2.2 on its HDMI port, but it’s not always for all of them. Some models will only support HDCP 2.2 for HDMI 1 and HDMI 2 inputs, so if you’re connecting a shiny new Ultra HD Blu-ray player, such as the Panasonic DMP-UB900 or Samsung UBD-K8500, make sure to use the correct HDMI input. The first rule of buying any cable should be to look for certified cables, and the same holds true for DP. Before you buy a cable, make sure that it has been certified by DisplayPort so that you get the optimal output from it. Pin 20 on the DisplayPort connector, called DP_PWR, provides 3.3 V (±10%) DC power at up to 500 mA (minimum power delivery of 1.5 W). [8] :§3.2 This power is available from all DisplayPort receptacles, on both source and display devices. DP_PWR is intended to provide power for adapters, amplified cables, and similar devices, so that a separate power cable is not necessary.HDMI is unique among the many connection options in that it’s able to carry both uncompressed video and uncompressed audio. This is why it’s become the connection of choice for most multimedia devices as it’s a one-cable solution.
I know that HDMI can be very slow (depending on monitor)... sometimes as much as 5 seconds to see the new source. I assumed that was content protection built into the standard and/or slow decoder ASIC. You might think it's a simple matter of hooking up whatever cable comes with your monitor to your PC and calling it a day, but there are differences that can often mean a loss of refresh rate, color quality, or both if you're not careful. Here's what you need to know about DisplayPort vs. HDMI connections. There are now cards with DisplayPort 2.1 support, but they're still of different levels. Intel's Arc GPUs support 10 Gbps per lane, for a 40 Gbps maximum connection speed (not including 128b/132b encoding). AMD opted for the faster 13.5 Gbps per lane (54 Gbps total), but neither company supports the potential 20 Gbps per lane variant. But perhaps the bigger issue now isn't GPU support. This section needs additional citations for verification. Please help improve this article by adding citations to reliable sourcesin this section. Unsourced material may be challenged and removed.
The interface uses a differential signal that is not compatible with DVI or HDMI. However, dual-mode DisplayPort ports are designed to transmit a single-link DVI or HDMI protocol ( TMDS) across the interface through the use of an external passive adapter, enabling compatibility mode and converting the signal from 3.3 to 5 volts. For analog VGA/ YPbPr and dual-link DVI, a powered active adapter is required for compatibility and does not rely on dual mode. Active VGA adapters are powered directly by the DisplayPort connector, while active dual-link DVI adapters typically rely on an external power source such as USB. Other use cases might push you toward DisplayPort as well, like if you want to use MST to have multiple displays daisy chained from a single port. That's not a very common scenario, but DisplayPort does make it possible. Home theater use on the other hand continues to prefer HDMI, and the auxiliary channel can improve universal remote compatibility. If you're hooking up your PC to a TV, HDMI is usually required, as there aren't many TVs that have a DisplayPort input. HDMI does not natively support MST. However, you can use a DisplayPort hub with an HDMI adapter to daisy-chain multiple HDMI monitors through the DisplayPort on your computer.
Related:
Great Deal 
New Comment