Star Brite Heavy Duty Boat Bottom Cleaner - Remove Deposits, Scum Lines & Rust Stains Quickly & Easily from Boat Hull - Safe for Fiberglass, Wood, Iron & Painted Surfaces

Product Information

Bleach: Bleach can cause harm to the marine ecosystem and it should be avoided when cleaning an underwater boat hull Ounce Boat Hull Scraper: The 10-ounce boat hull scraper is a heavy-duty stainless steel scraper that can be used to manually scrape dirt from a boat's hull when it's in the water

Soft or ablative antifouling paint should be cleaned by gently sweeping a soft cloth along the surface of the hull. Scrubbing ablative paints will cause large clouds of toxic chemicals to be released into the water, this can damage the environment and even cause a build up of nasty chemicals in the food chain. You can read our previous blog about the impact of antifouling on the marine environment for more information. A mask and snorkel can make the process of holding your breath and coming up for air much easier. Gloves Get a 12ft+ extended rotary brush: Get at least a 12ft. extended rotary brush. Ensure that the rotary brush is long enough to reach the bottom of the boat in the waterHiring a diver to clean the boat hull: Hiring a diver to clean the underwater hull is an alternative hull cleaning option available. This option is popular for boat owners that do not want to enter the water themselves There are many reasons to choose a glass bottom boat excursion, especially if you are travelling with family and have children of different ages – the main reason is because it will please them all! You will give them (and yourself) a unique experience on a boat ride quite different from the traditional ones, and offer an unusual and exciting perspective of the aquatic environment. Shopping for boat bottom paint for speed is not easy for there are a number of factors for you to consider first before spending extravagantly. By happy chance, this antifouling paint manufactured by TotalBoat is a priceless investment that you can fully count on.

If you’ve cut down through the primer to the gelcoat in only a few places, touch these up with a patch coat of epoxy primer before applying another full coat. If you’ve cut through in a lot of places, either your hull surface is uneven or you used too coarse a grit of sandpaper. If you need to spot prime more than about 10% of the bottom, just put on another full coat. It will go faster than a spot prime coat. The first method of barnacle removal is with good old elbow grease! Many people would prefer to use a pressure washer to remove barnacle buildup but a pressure washer is not that effective on young barnacles and can actually be detrimental to your boat hull by causing damage to the gel coat. Therefore, we suggest you only use a pressure washer if the barnacle build up is extensive and cover large areas of the hull.Besides, this is designed with Biolux technology that is especially intended to impede slime and significantly improve antifouling performance. And, since it can guarantee permanent and rigorous protection against all forms of fouling, this is perceived as one of the superb and most economical bottom paint products that is worth-investing in. Products not compatible with the hull surface: Avoid using products not compatible with a hull surface. For example, a hard bristle brush might not be a good option for fiberglass hulls as it may cause damage to the