BRITISH GAS WIRELESS RECEIVER WR1

Product Information

press button 1 (lower) then 2 and hold both depressed you should see a red light flash the reciever is then in learn mode.

In addition, when attempting to re-pair the receiver and transmitter, the receiver red LED is supposed to flash for 7 seconds after the batteries are put into the transmitter - it doesn't. I've gone through the procedure several times to no avail. If the red LED reamins on you need to repeat all of the above If it is still on something is wired incorrectly or brokenI came home last night at 00:30 and found the display had died and after spending 15mins working out how to replace the batteries l then spent till 2am browsing the web to find out how you get the two units to talk to one another. Random button pressing was not working!!! It has the British Gas-branded WR1 receiver and RC Plus transmitter/thermostat. The transmitter flame indicator is lighting both when it should both from timer settings and manually, but the boiler is not lighting and the receiver has both red and green LEDs on permanently (no flashing). NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives The batteries died on my wireless thermostat and there were no instructions or manuals from the previous owner of the property. I have seen other posts regarding issues with these units but they don't seem to be quite the same as my problem.

Make sure both battery compartments are out on the 'Wireless Display' and the screen has gone blank, takes about 2 mins to fadeDoes the green 'on' light come on when the receiver is manually overridden? If not then the receiver is definitely faulty, if it does it still could be.

NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024.Hi.... I have recently had a problem with my central heating timer and suspect it is the wireless receiver unit which has either failed or has a loose wire but would value opinions if anyone could offer advice...