Makita HR4013C/1 110V SDS-Max AVT Rotary Demolition Hammer Supplied in A Carry Case

Product Information

Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiselling applications.

If you are still unsure, go through the list of pros and cons below to help with your decision. Pros of the Product Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs Soft start feature gives you control over the current and the load so that it will become constant throughout the different speeds that you select. This helps reduce wear and tear on the motor, which in turn, increases the lifespan of your tool. The chisel-only mode has convenient features. Easy to operate operation-mode change lever, located on the top of the motor housing for reduced possibility of breakage

Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body The latest application of Makita’s patented AVT, anti - vibration technology, features the latest version of the body design that completely insulates the grip handles from the motor and transmission section of the machine. The dynamic vibration absorber has also been improved and the larger damper spring cuts the reaction force when the drill bit hits the substrate. Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2

Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.

Find your dust extractor

Since it is capable of variable speed, you can switch between 1,450 and 2,900 BPM modes (with a no-load speed of 250 to 500 RPM). As with most powerhouse rotary hammers, it is corded and comes with a 15-foot-long line. Quality L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced This rotary hammer’s most prominent feature is its AVT or anti-vibration technology, which is helpful if user fatigue is often your concern when handling concrete or masonry tasks for hours. Overall, the Makita HR4013C is a great choice if you’re looking for a rotary hammer with soft vibration, especially if user fatigue is your biggest concern. The Makita HR4013C’s 11-amp motor has up to 8.4 foot-pounds of impact energy. Weighing just over fifteen pounds, it sports a maximum concrete drilling capacity of 1-9/16 inch.

Another great feature of this model is the soft-start function to improve user control, as well as the constant speed powered by the electronic controller even under heavy loads. Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit Makita's Latest AVT 40mm SDS MAX Rotary Hammer Allows 8-Hour Working The latest version of Makita’s popular 40mm AVT rotary hammer drill delivers a massive 25% increase in impact power with an even larger 30% reduction in vibration rating. Impact energy of the new Makita HR4013C is increased to 7.6 Joules whilst the vibration rating in hammer-only action is ultra-low at 4.5m/sec² and in rotary hammer drilling mode an equally impressive 5.0m/sec².

Available version(s)

Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling

Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body. As mentioned earlier, using this hammer drill’s anti-vibration technology (AVT), you’ll experience fewer vibrations when you handle the tool. Of course, it doesn’t mean that all the vibration is gone, but it will make it more comfortable to handle than your standard rotary hammer. This would be a big plus for beginners (or seniors) who aren’t so comfortable with long hours of demolition jobs. It has a soft start feature. Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism efffectively isolating most of the vibration away from the user In hammering mode, on/off switch is switchable between two switches to meet your application, for continuous or intermittent chiselling applications

What Are the Alternatives?

Anti vibration technology (AVT) protects the user from unwanted strain and works in 3 separate ways delivering unrivalled low vibration: This rugged 2-mode machine – rotary drilling with hammer action and hammer action-only for chiselling - has the easy-to-operate mode change switch positioned conveniently on top of the motor body ahead of the vibration reducing rear grip handle. With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the HR4013C can also be used with the trigger controlling chiselling for intermittent work. The new Makita HR4013C SDS max rotary hammer will punch a 40mm hole in concrete and with a 1,000 watt motor that will run up to 500rpm without load, this machine will generate up to 2,900 blows per minute for 7.6 Joules of impact energy. This represents a 25% increase over the popular HR4011C model that it supersedes.