Joined in 2023 
82 
63 About this deal
Fresco Logic to demonstrate the Industry's First USB-C PD3.0 Programmable Power Supply (PPS) Total Solution". Archived from the original on 28 February 2018 . Retrieved 25 February 2018. It is capable of delivering up to 100W – even though smartphones don’t need up to that to fast charge. It is useful for other devices though, including laptops with USB-C port.
iPad Pro รุ่นใหม่ 2018 นั้น ช่องชาร์จได้ถูกเปลี่ยนเป็นช่อง USB-C แล้ว ใช้สาย C to C ในการชาร์จเร็วได้เลย) ** If you have only QC 3.0 devices and don’t need the USB Type-C charging port, then Tronsmart also offers the following:
Remove Member
The use of a QC3.0 adapter brings several benefits to your charging experience, making it an invaluable accessory for your compatible devices. Here are the key advantages of using a QC3.0 adapter:
Depending on the devices at each end of the cable, each connector is capable of some combination of one of multiple standard power levels and one of multiple data standards. Fun, right? If two devices don’t quite mesh—for example, if you connect a fast-charging-capable phone to a slow charging port, or copy data from a speedy hard drive to a slow computer—the slower side always prevails. The important idea here, however, is that a specific connector doesn’t determine the connection’s power or data capabilities. INOV works by intelligently detecting the exact amount of voltage required by your device. This is a significant improvement from QC 2.0, which offered four different modes. By detecting the precise voltage your device needs, QC 3.0 provides two significant benefits. First off, it maximizes your charging performance. For instance, if your device requires an unusual voltage like 19 volts, the charger will deliver it. You won’t be left flat by a 12 or 18-volt charge. Secondly, the technology avoids any wastage. You won’t be feeding 20 volts of power to a 19-volt device. Not only does is avoiding waste good for the environment, it’s also good for your device. Excess energy is shed as heat, which can cause damage. By avoiding this, QC 3.0 prevents overheating. Which is Faster? Since USB-C is a type of connector, and we’ve established that connectors don’t determine the underlying capabilities, it’s important to know that USB-C connectors can provide you with the performance of almost any generation of USB that has come before—what’s important is what’s behind the connector or at the other end of the cable. For example, if you were to have the right cable to connect the latest and greatest smartphone with USB-C into an old, low-power, USB-A port, the phone would likely alert you to the low power and refuse to charge. The slower protocol always wins out.
Report project as inappropriate
It’s worth noting that when using a QC3.0 adapter, the charging speed may vary depending on various factors such as the device’s battery capacity, temperature, and overall health. While the QC3.0 technology enables faster charging, it may not always reach its maximum potential in certain conditions. Nevertheless, you can still expect significantly faster charging times compared to standard USB chargers.
That said, for Android devices that support both standards, QC 3.0 is generally faster. The reason for this is INOV technology. PD charging won’t always have an exact wattage or voltage that matches your device’s needs. If it doesn’t, it will default to the next lowest power level. With QC 3.0’s INOV technology, you’ll always get the maximum voltage. Again, the exact difference will depend on your device. On some phones, the difference is not noticeable, while it can be significant on other devices. It’s worth noting that while these devices can be charged using a QC3.0 adapter, the charging speed may vary depending on the device’s capabilities and requirements. It’s always recommended to refer to the device’s specifications or user manual to ensure compatibility with QC3.0 technology. Buy QC 3.0 accessories. They’ll work with 2.0 devices, but they’ll give you 3.0 speeds if you later upgrade your device. How fast can a fast-charging phone charge if a fast-charging phone can charge really fast?". CNet. 2 December 2016 . Retrieved 4 December 2016.I incremented and decremented until the voltage stopped changing. My particular device accepted decrement pulses until it should be (nominally) 3.6V, though the voltmeter continued to display 4.27V. I suspect that's the actual output voltage of the LiPo cells inside the device,... Read more » On the other hand, Apple and Google Pixel phones are a bit different. Both of them use PD 3.0 only. As with Android devices, though, your performance will depend on your device. For example, older Apple devices like the iPhone 7 don’t support any kind of fast charging. But with the iPhone 8 and newer, you get full PD compatibility. Be aware that you won’t get any benefit whatsoever from a QC 3.0 charger. Apple phones simply aren’t compatible with the technology. PD is short for “power delivery”. The technology is capable of delivering up to 100 watts of power, far more than any smartphone requires. However, this high wattage has some significant advantages. For instance, it can be used to power laptops. Apple’s new MacBooks all use it, and can even be used while they’re charging. This means you’re getting much better performance than you’d expect from a standard USB cable.
Snapdragon 8+ Gen 1 Mobile Platform | Latest premium-tier powerhouse | Qualcomm". www.qualcomm.com . Retrieved 2 June 2022. Reduced Charging Time: The most significant benefit of using a QC3.0 adapter is the significant reduction in charging time. With its ability to deliver higher power output, a QC3.0 adapter can charge your compatible device at a much faster rate compared to standard chargers. This means you can spend less time waiting for your device to recharge and more time using it. Well, yes… and no. In a broad sense, you’d be correct. Both PD 3.0 and QC 3.0 will charge your battery faster than traditional USB. At the same time, there are important differences between the two. Depending on your phone, one or the other can be a significantly better choice. In fact, many phones support PD 3.0 but not QC 3.0, or vice-versa. So, what’s the difference? Let’s begin by talking about the basics of both technologies. Once we’ve done that, we’ll be well-equipped to discuss which one is better for your purposes. As you can see, PD 3.0 and QC 3.0 are similar, but remain distinct. They’re fundamentally different technologies. Which one is better? It really depends on your device. In theory, QC 3.0 is best for smartphones. By providing the exact voltage required, it allows you to maximize your battery’s performance. That said, it’s proprietary. Only certain Android phones currently support the technology. Unless you’re using one of these devices, you won’t be able to take advantage of QC charging. On the other hand, most modern smartphones support PD charging. These include all Apple phones starting with the iPhone 8.Though USB power has gone from less than 1 amp of current (1 A) in its earliest incarnations to more than 2 A today, devices have maxed out the data and power capabilities of these connectors. Bottom line: If you have a QC-enabled device (right now, the category consists mostly of high-end Android phones) and a high-quality charger, the extra speed can be especially convenient for reviving your dead phone before you run out the door.
Great Deal 
New Comment