2x Quick Release Latch 30mm Universal Vehicle Mini Hood Pin Lock Clip Kit Push Button Bonnet Aluminum Alloy For Auto Car Bumper Hood License Plate or DIY

Product Information

The manual release lever can be supplied pointing down (towards the opening jaw) for automatic release applications below ground; pulling up releases the load (known as a reverse lever). Alternatively the release lever / arm can be supplied pointing up (towards the rigging gear / anchorage eye) and this is used for automatic release applications where the operator is below the load. Both lever types can release the load when the operator is adjacent to the HookClamp. The "PNU-Series" Hook-Clamp is fitted with a compressed air cylinder (Pneumatic ram) and allows for air pressure to release the load. The Air Cylinders operate at 60 to 100 PSI. The Hook-Clamp can release the load with or without load on the unit. (providing the safety hitch pin is removed).

Do not side load the Remote load release device as it may cause loss of retainer rings and other parts or permanently damage the device. The Auto HookClamp can also used as a drop test clamp or load dropping clamp. This is where the clamp is used to release the load "under load", for example when dropping sea defences into the sea from a boat. A multitude of general Industrial applications; indeed for any application where the rigging gear needs to be disconnected though is is an awkward, difficult to get to position. Automatic remote release of the rigging gear prevents unavoidable accidents. Sub-Sea use, made completely from aerospace-gradestainless steel the HookClamp has the ultimate in corrosion resistance.Manually, pulling a long release line. No modification of the device is required. This method is used with lower capacity models, offers the lowest cost, and has many satisfied users. It is important to test the effort frequently after some material has been removed so as to prevent the removal of too much material. Off-shore applications as used by the oil, gas, maritime, coastal, fishing, lifeboat industries etc.... Air Cylinders provide another method of release and are fitted for activation using shop air at 60 to 100 PSI.

Explosive electric squib thrusters inserted into a special chamber below the toggle pin are used successfully to activate the device.Third part whiteness test and certification available at extra cost (3rd party approval DNV, BV, Lloyds etc...) Safe working loads / Capacities range from 590kg to 69,000kg though special bespoke HookClamps are available on request, (we have designed and made units up to 250 tonne though greater capacities can be made on request) While in its loaded position, do not obstruct the Remote load release device so as to prevent its body being aligned straight with the line of load. Misalignment may prevent the movable jaw from releasing the connected member even with the device in the released position. Ideal for use in the water utilities industry to automatically place pumps into sumps or wet wells.