TOPWAY Tile Leveling System 400pcs Pack 3mm Levelers Spacers for Building Walls Floors

Product Information

The threaded spacer clip is inserted underneath the tile edge into the adhesive bed, before the adjacent tile is laid. The Raimondi VITE Tile Levelling cap is then threaded onto the clip and tightened until the tiles are level. The cap is ergonomically shaped with finger grips to be easily tightened by hand and spins freely, so that caps can be placed and spun down to the tile surface in 1 second. Once the adhesive is set, remove the cap by beating it with a Raimondi White Rubber Mallet to avoid marking the tiles (or with the foot). Beat parallel to the joint line. As an alternative, unscrew the cap, remove it and beat directly on the clip (parallel to the joint line). After having spread the adhesive, insert the Raimondi Tile Levelling System clip (base/support) underneath the tiles and along the 4 sides. Pull apart: When separating the broken off clips/caps when the levelling job is finished can be sped up by using the drill on a reverse rotation to remove the cap from the used clip.

Tile Levelling | Levelling Systems | Topps Tiles

If you are using this system over a large area with a lot of clips, the Raimondi LEVMATIC Battery Powered Levelling Pliers makes pushing the wedge into the clip effortless and reduces fatigue. The Raimondi Tile Levelling System is a revolutionary new way of ensuring that all your tiles are perfectly level with one another. The Raimondi VITE cap also features a hollow design so that users can see the grout joint easily on intersections. To facilitate this operation, the use of the traction-adjustable Raimondi Tile Levelling System pliers is recommended.The Mustang Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in a grout joint between two tiles. A plastic wedge is then driven by a pair of specially designed pliers into the aperture in the centre of the clip until it sits flush on the surface of both tiles, so that they are both level. Once the tiles have set, the clip is easily broken off, leaving only its base bedded in the adhesive under the two tiles. The Mustang Tile Levelling System plastic wedge is fully re-useable, which saves costs on further jobs, as you only need to buy clips.

Raimondi VITE Tile Levelling System - Tiling Supplies Direct Raimondi VITE Tile Levelling System - Tiling Supplies Direct

Insert the Raimondi Tile Levelling System wedge in the clip (base) slot, using the Anti-chip/scratch plate if required, paying attention not to pass the breakpoint.The use of the pliers is recommended and is facilitates accurate levelling and speeding up the insertion of the wedge in the clips. They also optimize the pressure on the tiles being levelled. The Raimondi VITE Xpress tool can be used on both floors and walls, and works with individual caps as well as caps with anti-scratch washers.