Lithofin MN Stain-Stop Impregnator Sealer For Artificial & Natural Stone 250ml

Product Information

Lithofin MN Stain Stop does not affect the appearance of natural stone. Some stones may become slightly darker in colour. Lithofin MN Stain Stop greatly reduces the water absorbency of natural stone and only slightly effects the water permeability. This ready-to-use special impregnator protects absorbent, stain-sensitive unglazed ceramic and quarry tile surfaces against stains. Prevents penetration of oil, grease and water, making maintenance easier. Lithofin Stain Stop PLUS is an impregantor plus colour intensifier. It is a ready-to-use special product from the LITHOFIN-Range for ceramics, natural and concrete stone.

Lithofin Stain-Stop | Lithofin | Stone Impregnator | Ardex Lithofin Stain-Stop | Lithofin | Stone Impregnator | Ardex

Don't forget, if you need any help selecting the right products for your needs, we are here to help! Lithofin Stain Stop is for invisible protection against staining and for facilitating maintenance of all natural stone surfaces, including polished marble. It is UV-resistant and does not yellow. After 30-40 min. surface will be dry and ready to be stepped on. Complete drying process and effectiveness of the impregnation will take approx. 5 days. During this time, do not cover the surface and wipe up any spills immediately. Lithofin is renowned in the industry for its scientifically advanced products that clean, protect and maintain stone and tiles in great condition. Casdron Enterprises Limited has been the sole distributor of Lithofin products in the UK and Ireland since 1988. m² How many unit(s) will I need? Enter the area of your project here (m²): The number of kg unit(s) required for your projectLithofin Stain Stop is perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces. Please Note: marble and limestone will remain sensitive to acid. view the results in the results box. All tile and joint dimensions are rounded up to the nearest number Lithofin Stain Stop PLUS sinks into the stone and reduces the capillary absorbency so water, oil and grease can no longer penetrate the surface. These materials remain on the surface and can be wiped off before they cause stains. In addition to protecting the stone, it darkens it – thereby invigorating the colour structure.

Lithofin MN Stain Stop - Tiling Supplies Direct Lithofin MN Stain Stop - Tiling Supplies Direct

Outdoors, the colour intensifying component lasts for one to two years, depending on the type of stone and the weather. The protective component will last for about three years. Indoors, the durability depends on the care products used. Strong degreasing agents and layer forming products are not suitable. For regular maintenance, we recommend MN Wash & Clean which supports the effect of the product.Lithofin MN Stain Stop contains high quality water and oil resistant components, penetrating into the surface and coating the capillaries with an extremely thin invisible film. Oil, grease and water are not absorbed by the surface, but remain on the surface where it can be easier wiped off and cleaned. During this time, even oil can easily be removed without leaving stains. Lithofin MN Stain Stop is a special sealing product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Most of the solvents evaporate within two hours. Floors can be walked on after 12 hours. The impregnator is fully effective after 24 to 48 hours. Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend MN Wash & Clean, for kitchen counter tops MN Easy-Clean. Lithofin Stain Stop PLUS is for making absorbent ceramic, terracotta, natural- and engineered stone surfaces stain resistant and at the same time intensifying their colour structure.