Nuby RapidCool Portable Baby Bottle Maker, Prepare A Formula Feed in Just 2 Minutes, Ideal for Travel Bottles and Night Feeds. Includes Milk Powder Dispenser and Digital Lid. No Filter Needed.

Product Information

Contains: 1 x RapidCool™ Flask, 1 x Digital Lid, 1 x Small Milk Powder Formula Dispenser, 1 x Lid Cleaning Brush Use a flask like this one which tells you the temperature of the water inside when you touch the lid. Boil and fill before bed. This is novel, efficient, easy to maintain, safe, hygienic and cost effective to produce. The system is capable of coping with the loads of the system, and can be easily adapted to suit different capacity machines. This has not only been demonstrated within the project, but further development outside of the project has already begun to produce a more compact system for domestic use.

Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C? TRAVEL OLD VERSION, NEW VERSION AVAILABLE: Truly portable for preparing formula feeds on-the-go. Unlike bottle making machines, the RapidCool easily fits in most nappy change bags and no power supply is needed. Take it anywhere! Can operate autonomously with existing controls showing that this is simple and fast to use, controlling the cooling profile and incorporating some key safety features: We recommend that the feed is used immediately (as soon as the Nuby light turns green and indicates the feed has cooled sufficiently), as per the NHS guidelines. VALUE FOR MONEY - No complex set up, easy to clean, compact, and doesn’t require expensive replacement filters. Makes feeding time a breeze and includes Formula Dispenser. Our kit contains 2 RapidCool bottles with Digital Lids, as well as a Flask and a Formula Dispenser.Makes between 90ml (3oz) and 240ml (8oz) feeds in line with all formula brand recommendations, perfect for a newborn on smaller feeds or for growing babies on larger feeds To design a rapid cooling chamber that can operate with metal cans, PET bottles and glass bottles in the range of 250-650ml. This should achieve a cooling rate of 15°C per minute for aluminium cans; 8°C for plastic bottles and 5°C of glass bottles CONFORMS TO NHS GUIDELINES - You can be sure the RapidCool is safe for you and your little one. It meets the NHS Guidelines on how to prepare baby milk safely. Agreements are already in place to set-up future production of the system, and a family of related products has already begun to form targeting domestic use in addition to commercial/ retail use. The developments have already resulted in 2 granted patents with a further 2 pending. These have been filed throughout the world based on the broad global appeal of the technology. You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave.

How does it work? It’s easy-peasy! Boil fresh water, measure formula powder, fill RapidCool with hot water, add formula powder, and mix well. Simply wait for the digital display to show a green Nuby logo and dispense the feed into your sterilised baby bottle. A 120ml feed will be ready to serve in only 2 minutes*. No cold-water baths to cool a bottle down, no having to reheat a made-up bottle, no worrying about making a feed correctly. Just a safe feed to NHS guidelines, day, night, or out and about. Commercial refrigerators and freezers are ubiquitous and are used in diverse environments such as supermarkets, grocery stores, service stations, restaurants, hotels, pubs, and cafés. The most visible types are vending machines and open or closed refrigerated cabinets. Combined commercial refrigerator/freezers are estimated to consume 85TWh of electricity per annum. This is over 6% of total final energy consumption in the services sector. New parents have so much to think about when the little one arrives and making a bottle is one of them. It sounds like a breeze but when your baby is hungry, they’ll let you know about it in great volume! When the pressure is on, it’s difficult to remember the NHS guidelines for preparing a formula feed, but we’ve got you covered. Energy savings of over 80% compared with typical refrigeration systems could lead to significant savings if widely adopted. These will not only benefit the wider community, but offer distinct advantages to users who face increasing targets for energy reduction. In addition the energy reduction can provide cost savings for retailers and consumers alike. This was one of the primary justifications for the project, and based on both the technical progress and the dissemination work within the project, some major industrial partners/ customers have been already been attracted based on this appeal.She does use the prep but has the rapidcool out and about because her little one is on a formula with no premade! Intrinsic hygiene features were developed and through working with a major drinks distributor the consortium were also able to establish that Rapidcool was hygienic and safe. Some further advanced features were proposed which expand on the hygiene of the system so that it not only inhibits contamination, but may actually enable the system to clean cans i.e. they are cleaner after using the machine than they were to begin with. Specification, design and achievement of acceptable coolant pull-down rate, high COP at required temperature differential whilst maintaining low cost aspect. Time between system switch-on and first available beverage at drinking temperature not exceeding 15 minutes Moving forward under the “V-Tex” trademark, the technology has already obtained considerable interest from some world leading, multinational cooperation’s. The Rapidcool project has already demonstrated that “V-Tex”: Also to demonstrate that the technology is scalable without incurring problems e.g. multiple cooling chambers would increase cost and bulk of equipment and multiple vortices may cause interference between cans. Different mechanics Capable of cooling four cans simultaneously with no more than 33% increase in cooling time per can, guaranteeing shorter waiting times under high demand.

Multi-Can - Simultaneously cooling of small batches to achieve even faster vend times, and satisfy higher demand:Easy to clean and maintain: Clear warning lights prompt you to either run a cleaning cycle, descaling cycle or when it’s time to change your filter, for simple and fuss-free bottle feeding Simple: Add the formula to your baby’s bottle, press the power button to release a hot shot of 70°C water that kills any bacteria in the formula, shake then press the button again to dispense cooler water To make the night feed, mix the formula with some hot water, give it a shake and then add the cold water. This safely kills bacteria in the formula while bringing the milk to drinking temperature straight away. It does the same thing as the Perfect Prep machine but this way you know you're using hot enough water (which is the issue with the Prep machine). DAY AND NIGHT - For a fast, quiet night feed keep the RapidCool to hand, along with the filled milk powder dispenser and the insulated flask of freshly boiled water. When your baby wakes in the night, you’re ready to feed in just 2 minutes without a trip to the kitchen.

Can operate autonomously with existing controls showing that this is simple and fast to use, controlling the cooling profile and incorporating some key safety features. Strategic partnerships have successfully been formed with a number of leading white goods manufacturers who will lead on the development and set up for manufacture of the system during the next stages of development. They have the knowledge experience and importantly the capacity to meet the anticipated demand for such a product which could become common place in a number of environments. It is anticipated that set-up and manufacture of the system could generate additional jobs in addition to revenue. Use with tap water: There is no need to use bottled or filtered water, our filter features a filtration membrane designed to remove bacteria, impurities and contaminantsUse with tap water: There is no need to use bottled or filtered water; Our antibacterial filter, with internal filtration membrane, removes bacteria, impurities and contaminants Utilising water as a cooling medium, the project was able to cool consistent and Rapidly. The optimum results vary depending on the type of product and container used. However for a typical 330ml can of soft drink the Rapidcool prototype consistently cooled in under 50s. The concept of achieving this is based on the generation and disruption of a vortex through spinning the beverage at high speeds. However the ultimate attainment of such a fast cooling rate was based on careful optimisation; the development resulted in a number of inventive steps which have now been patented. In short the developments resulted in an optimised process which combines, water submersion, spinning at optimised speeds, supplementary motions and cycle interruption. A number of recommendations, and additional requirements were outlined which will help to further improve the system performance during future developments. New parents have so many things to think about when their little one arrives, and making a bottle is one of them. It sounds like a breeze, but when your baby is hungry you can be sure they’ll let you know about it in great volume! When the pressure is on, it’s difficult to remember the NHS guidelines for preparing a formula feed, but not to worry - we've got you covered. Sleep friendly: With a clear digital display, adjustable volume control and soft-glow lights, preparing a bottle in the dark has never been easier