TP-Link 300 Mbps Wireless N USB VDSL/ADSL Modem Router, Single-Band, Broadband Speed Up To 100 Mbps, Versatile Connectivity, 4xFast Ports, USB 2.0, TP-Link Tether App, Easy setup(TD-W9970)

Product Information

With 300 Mbps wireless speeds on the 2.4 GHz band and 4 megabit LAN ports, the TD-W9970 is perfect for streaming in HD, online gaming and other bandwidth-intensive applications. How to setup and provide access to your local storage drive on modem router (self-developed UI) 06-28-2022 65156 Note: The VPN Servers Endpoint from both ends must use the same pre-shared keys and Perfect Forward Secrecy settings. Feature Filter: ทั้งหมด User Application Requirement Configuration Guide Troubleshooting คำถามที่พบบ่อย Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL)

The latest VDSL2 technology allows the TD-W9970 to deliver impressive VDSL broadband speeds of up to 100Mbps, which is almost five times faster than ADSL2+. The integrated DSL port supports all standard DSL connections* for compatibility with most ISPs. The TD-W9970 serves as a DSL modem and wireless router, combining two devices in one.

Ultra hub and booster pairing + missing stuff on vodafone broadband app in Other broadband queries 15-10-2023 This section will guide you to configure a VPN tunnel between two modem routers. The topology is as follows. Contains BCM wireless N chipset @ 2.4 Ghz and one of the areas where cost has been cut. In reality this means you should get 40-50 Mbps throughput. Of course there are plenty of routers out there which will give you faster wi-fi speeds, but you will have to pay for it.Also bear in mind your internet connection speed. If you only have say a 20Mb or 40Mb connection then speed will be limited anyhow. I didn't really keep this particular modem on the line for as long as I normally do when testing, DSL performance seemed very good and despite spending several hours poking around the GUI, I couldn't even spot any bugs which must be a first when reviewing a modem. I'm satisfied that its stability is down to the BCM series of chipsets which have a good record for line performance.

Powerline adapters may cause intermittent connection of DSL modem router in a few rare cases 03-24-2022 69068 Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Despite the above, I somehow connected it all up and am actually typing this over internet provided through the Archer C7 router. On the TD-W9970, the DSL lightis on and the internet light is off - implying that I have somehow managed to get it running in bridge mode. But here's the odd thing - despite me using the live connection made through the Archer C7 router to write this, the internet light on the Archer C7 is red which indicates no internet. So, I'm not fully convinced that the problem is so am still posting this asking for help.How to connect to Internet by using Windows XP built-in PPPoE Wizard with a modem at bridge mode 03-21-2022 201318

I would greatly appreciate some step-by-step guidance on how to set up the TD-W9970 in modem-only mode, to use with an Archer C7 router, over a talktalk fibre IPS. This particular line is very stable, and never normally shows much variance aside from if a cross talker reboots their modem. The issue is that this part as below never seems to connect even after 20 mins - it flips between 'connecting' & 'disconnected' I didn't really expect anything more on their budget router, although it is a shame because TP-link could find themselves with quite a market with the DSL geeks if they did.Any thoughts on the situation I describe with the Archer internet light being red yet I'm still able to access the internet? It is possible to telnet into the modem via LAN1 only. The CLI is a custom TP-Link build and there is no access to the Broadcom CLI and access to the Busybox shell has been disabled. So how does it actually perform? Well not too badly for a wireless N device actually. Below are some speed tests and signal strengths taken at various points around my home. How to setup and share a printer on your local network with Print Server feature on the TP-Link device (MAC OS) 06-28-2022 203382

Maximized Range–Powerful external antennas provide far-reaching wireless coverage in every direction.How to configure WDS function on Archer D5, Archer D7(b), TD-W8968, TD-W8970(B), TD-W9970, TD-W8980, TD-W9980(B) 06-29-2022 98346