Wilton B.A.S.H 36" Sledge Hammer, 20 Lb Head (22036)

Product Information

pounds: Heads that are 20 or more pounds are designed for heavy-duty and professional use. These sledgehammers can be identified by their large head and long handle and are effective in driving rebar and shattering stone or concrete. Using the correct technique and proper equipment, taking regular breaks and staying aware of your surroundings can help minimize the risk of injury when swinging a sledgehammer.

Sledge Hammer 16lb | Toolstation Estwing Sledge Hammer 16lb | Toolstation

An 8 pound sledge hammer is one of the most common sizes used in residential construction. It’s heavy enough to demolish most things you’ll encounter like cabinets, wood framed walls and thin concrete slabs but isn’t overly heavy. Which Is The Better Sledge Hammer Handle Wood Or Fiberglass? Position your feet based on the type of swing you need. If you’re going to swing the hammer vertically, stand with your feet shoulder-width apart directly in front of the target. For a diagonal swing, stagger your feet with your non-dominant foot in front and a dominant foot behind you. Both are prone to break near the head on a bad hit, and when that happens wood handles are easier and cheaper to replace. Another use of sledgehammers is for driving railroad spikes into wooden sleepers during rail construction. When the two ends of the Union Pacific railroad were joined at Promontory, Utah, Leland Stanford hammered a golden spike into a sleeper with a silver hammer. [4] Sledges used to drive spikes for rails had curved heads [ citation needed] that came down to a "beak" that was only about one inch across. The shape meant that drivers needed to be accurate, and spot where the spike hit was often not much larger than a small coin, as anything larger would hit the plate or the sleeper. The curved head kept the handle away from the rail, as the spikes were driven with the rail between the spike and the driver. These are often called spike mauls.

Summary: What Is A Sledgehammer Used For?

Breaking up pavement: Sledgehammers are used in landscaping to break up pavement, concrete slabs, walkways or asphalt. A sledgehammer can deliver a precise blow where the slab is weakest breaking it up into small enough pieces to carry away. Proper Grip & Stance: Always maintain a proper grip and stance when swinging a sledgehammer. The handle should be held with both hands, one hand should be near the head of the hammer and the other near the end. Your feet should be about shoulder width apart in an athletic stance, with one foot slightly forward. This stance will provide a solid base of support and help to balance your body when swinging the hammer. Splitting Maul: A splitting maul is a type of sledgehammer that’s specifically designed for splitting wood. It has a heavy head with a sharp edge on one side, which is used to split logs into firewood. It also has a pointed end on the other side, which can be used for driving stakes.

20.5 lbs. Nylon Sledgehammer with 39.37 Supercraft Dead Blow 20.5 lbs. Nylon Sledgehammer with 39.37

pounds: Sledgehammer heads that are between eight and 12 pounds take on a more traditional sledgehammer look that includes a long handle and large head. These sledgehammers are useful for heavy-duty household projects like removing walls or breaking up concrete. Our top recommendation for a lightweight, traditional-sized sledgehammer is the Craftsman Eight-Pound Sledge Hammer. Engineer Hammer: An engineer hammer, also known as a rail road spike maul, is a type of sledgehammer that’s specifically designed for driving railroad spikes. It has a long handle and a large, heavy head that’s used to drive spikes into railroad ties. Sledgehammers are some of the most common tools used in construction, demolition, landscaping and other physical type of work. If you’re working a job that requires physical labor, at some point you’ll probably need a sledge hammer. Demolition They come in two basic designs flat head or spiked. Flat is better for all around demolition work while a spike is better for penetrating into a slab or masonry wall. Drilling hammer [ edit ] A man cutting a paving stone using a drilling hammer to drive a chisel Drilling hammerA sledgehammer is an important part of any professional or DIYer’s tool arsenal. Although most sledgehammers consist of a steel head attached to a handle, many characteristics distinguish a quality sledgehammer from a run-of-the-mill product. Handle material, length, and arrangement all play an important role in a sledgehammer’s quality and designed use. Our top recommendation for a steel-handled sledgehammer is the Wilton B.A.S.H 20-Pound Sledge Hammer, whose durable, rubber-coated steel handle minimizes vibrations while increasing control. Weight Sledge hammers come in a variety of designs which make them more effective at specific jobs. The most common design is a flat head that weight between 6 to 22 pounds mounted on a 36 inch shaft. But the shaft length, head design and head weight can vary based on the job you’re doing.

5 Best Sledgehammers (2023 Review) - This Old House

A sledgehammer is a standard tool used in construction work even if you’re not doing much demolition. You don't have permission to access "http://www.homedepot.com/p/Bon-Tool-36-in-20-lbs-Sledge-Hammer-84-577/310276421" on this server. Different types of hammers - what there are, and what each type is designed for". www.diydata.com . Retrieved 5 April 2018.The sledge hammer is one of the most common hand tools used in construction and demolition work. The weight of its heavy metal head paired with a long handle creates a substantial force when hitting the target.