TP-LINK Archer MR600 AC1200 4G+ Cat6 Mobile Wi-Fi Router Dual Band, 4G/3G Network SIM Slot Unlocked, No Configuration required, Support Guest Network & Parental Control, UK Plug

Product Information

Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Press and hold this button until the Power LED starts flashing to reset the router to its factory default settings. Le + : Wifi 6 : WiFi plus clair et plus puissant pour toute la maison, éliminez les zones de signal faible Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL)

To avoid wireless disconnect issue during ISP file upgrade process, it's recommended to upload ISP file with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Vendu par Stortle Le + : sa batterie puissante et ses 6 heures d'autonomie pour rester connecté le plus longtemps possible.

At the rear sit the four Gigabit Ethernet ports (if you’re only using 4G internet then you can use all of these for wired clients) and a SIM slot; this uses the 15mm micro-SIM format, but an adapter for nano-SIMs is thoughtfully included in the box so you can use whichever type you have to hand. With Ethernet ports and antennas, the router provides wired and wireless access for multiple computers and mobile devices. Please verify the hardware version of your device for the firmware version. Wrong ISP file upgrade may damage your device and void the warranty. （Normally V1.x=V1） Easily share a 3G/4G connection with up to 64 wireless devices, such as phones, tablets, and laptops, at the same Connect your computer’s Ethernet port to one of the LAN ports on Archer MR600 via an Ethernet cable.

Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests

It isn’t fast or flashy, but the MR600 is the most affordable way to bolster your internet connection with a 4G failover

Co-works with TP-Link OneMesh products, to provide a more flexible and cost-effective Mesh network with a single Wi-Fi name for seamless whole-home coverage. There are ways to get better performance out of the Archer. TP-Link’s OneMesh platform lets you pair it with other TP-Link routers to create an ad hoc mesh. This won’t increase headline speeds but it could reduce the drop-off in other rooms. Alternatively, you can disable the MR600’s internal Wi-Fi radios and connect it to a dedicated access point or a separate mesh system, allowing you to get Wi-Fi 6 while keeping the Archer’s 4G capabilities. WiFi ครอบคลุมบ้านทั้งหลัง สัญญาณไม่สะดุดแม้ย้ายจุดใช้งานเพราะMR600สามารถใช้งานร่วมกับอุปกรณ์ขยายสัญญาณที่รองรับ TP-Link OneMesh เพื่อสร้างเครือข่าย Mesh WiFi ที่ครอบคลุมบ้านทั้งหลังในชื่อเดียว For the last year we've had Three 4G Home Wifi using a Huawei B535-212 router and attached an external aerial which has helped stabilise the wifi, but it's still unstable at best. Sometimes it's This ISP file can be used for Archer MR600/Archer MR400/Archer MR200/TL-MR6400/TL-MR100/M7200/M7350/M7450/M7650

The technical specifications of Archer MR600 are very similar to the two predecessors. It supports 4G LTE Frequency bands as below: How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode 06-24-2022 28885MU-MIMO technology has multiple devices connect to the Internet at the same time, reducing waiting time, increasing WiFi throughput for every device and boosting the efficiency of each data stream. With MU-MIMO supported, Archer MR600 provides users with faster network, less interference and lower latency.