Makita DMR110 Li-ion DAB/DAB+ Job Site Radio - Batteries and Charger Not Included

Product Information

Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Based on the DMR109, the DMR110 can now play DAB+ radio as well as DAB. This updated version is compatible with the Makita 7.2 'Cluster' style batteries, and the 10.8v/12v Max CXT and 14.4v/18v LXT 'Slide' style Li-Ion batteries.The DMR110 is not compatible with NiCD, NiMH or G-Series batteries. It can be powered by AC mains (cable included). Under System Type, see if you are using a 32-bit or 64-bit. If you are using a 64-bit version, you will need another computer for the update. There are eight language options available in the radio: English, German, Italian, French, Dutch, Danish, Norwegian, and Polish. If your radio fails to work correctly, or some digits on the display are missing or incomplete, carry out the following procedure.

SW Version" shown on the display. Press the Volume/ Tuning Control/Select knob to view the software version installed in the radio. The following show the symbols used for the equipment. Be sure that you understand their meaning before use. If your device has version V4.3.17-1C02E installed, you can follow the steps and install the update. Press “Advanced” again and turn the volume control 2 times to the left and confirm the input at “Software Upgrade”. Rotate the Volume/Tuning Control/Select knob to select the desired DAB channel. Press Volume/Tuning Control/Select knob to confirm the chosen frequency. DAB display: station name, program type, multiplex name, time/date, frequency, bit rate/audio type and signal strength

Connect a stereo or mono source (i.e. iPod, MP3, or CD player) to either AUX IN 1 or AUX IN 2 by audio cord. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. This radio has three tuning methods- Scan tuning, Manual tuning and Memory presets recall. Selecting a station - DAB

Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "DRC Value" shown on the display. Then press the Volume/Tuning Control/Select knob to enter the setting. The display will show the current DRC value. Rotate the Volume/Tuning Control/Select knob will change the frequency in the following increment: FM: 50 or 100 kHz Rotate the Volume/Tuning Control/Select knob to choose your desired language. Press the Volume/ Tuning Control/Select knob to confirm your setting. Once you have verified that you have a compatible operating system, follow this step-by-step guide: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Makita DMR110NW 18v LXT / 12v MAX CXT DAB+ Digital Job Site Radio White

Rotate the Volume/Tuning Control/Select knob until "Factory Reset" shown on the display. Press the Volume/Tuning Control/Select knob to enter the setting. Bit rate/Audio type Indicates the digital audio bit rate and audio type for the currently tuned DAB station. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Manual Tune" shown on the display. Press the Volume/Tuning Control/Select knob to enter the manual tuning mode.

Rotate the Volume/Tuning Control/Select knob to select the following options and press the knob to confirm the setting.Batteries: 10.8v Cluster / 10.8v/12v Max CXT / 14.4v/18v LXT Li-Ion Batteries (Excluding Makita 'G' Batteries) For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Select the desired waveband by pressing the Band button. Make sure the soft bended rod antenna has been well placed for best FM reception. Try to avoid operating the radio next to a computer screen and other equipment which will cause interference to the radio. Frequency and channel Indicates the frequency and channel number for the currently tuned DAB station. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.

Press the Auto tune button and the radio will search and stop automatically when it finds a radio station. The radio will continue searching for the next available station unless the operator presses the Auto tune button to stop the scanning. Rotate the Volume/Tuning Control/Select knob until "Language" shown on the display. Press the Volume/ Tuning Control/Select knob to enter the setting. Extremely robust - this Makita DAB radio is IP64 rated (dustproof and showerproof construction) with elastomer bumpers for protection against rough handling Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Reduced power, distortion and a "stuttering sound" are signs that the battery needs to be replaced.When using FM mode, your radio can be set to scan either local stations or to scan all stations including distant radio stations. Manual Tuning – FM DRC feature can make quieter sounds easier to hear when your radio is used in a noisy environment by reducing the dynamic range of the audio signal. There are three levels of compression: Rotate the Volume/Tuning Control/Select knob to get the desired sound level. The LCD display will show sound level changes. Rotate the Volume/Tuning Control/Select knob to scroll through the list of available stations. Press the knob to select the station.