Plasplugs Hollow Door Plugs & Drill Bit 20 Pack

Product Information

The first job is to measure the width of the door near the top and find its centre and mark it with a pencil at the point on the door you want your hanger to be fixed. For the purposes of this guide we are going to run through two of the above techniques for fixing to a hollow door. First we are going to use the purpose made hollow door fixings to fix a coat hanger rail to a hollow door and then we are going to secure a batten to the door using construction adhesive. Fixing to a Hollow Door Using Hollow Door Fixings In terms of fixing the batten to the door you have two choices; use the same hollow door fixings mentioned above or glue the batten in place using one of the many construction adhesives available today. The hooks above also feature a handy support to prevent it from dropping. In most cases if you are hanging heavy items, unless the fixing is supported from below as in the hook diagram above, the weight of the item will eventually cause the fixing to drop. Fixing a Batten to the Door

Plasplugs Hollow Door Fixings 20 Pack | Wilko - Wilko Site

I really like some of your ideas and will give them a go (and then will probably have to get a new door) Ha ha ha! In the following guide we look at some of the best methods of fixing to hollow doors and ensuring that the object you’re fixing actually stays in place on the door. Types of Hollow Door Fixings

Take two fixings and pop each one into a hole, pushing them in firmly so that the top of the plug sits flush with the door. Next, measure and mark both the centre of the door where you want your batten fixed and also the batten itself. Allow 24 hours for the construction adhesive to fully dry and you can then remove the screws and fill the holes over before painting. x Hollow Door Regular Duty Fixings & Screws for use in Hollow Doors, Thin Skin Partitions, Plywood and Fibreglass. Ideal for the home, boat and caravan.

Door Handles on Hollow Doors Repairing Loose Door Handles on Hollow Doors

For this tutorial we will be using some 2×1 inch planed batten, but you are free to use the correct size batten for your needs. As it’s planed we don’t need to sand it down, but if you are using just sawn batten, give it a good sand down first and once painted this will produce a good finish.

Types of Hollow Door Fixings

Lay your piece of batten face down and apply several thin beads of construction adhesive across the face of the timber. Sorry, mate. But if there is only a wisp of wood to fix to, the screws will not hold a standing door. You should drill through the outer(existing) and your new piece and countersink and insert screw right through to the top insert piece. Put the rail to one side and then pop the drill bit that comes with the fixings into a drill and drill out the two holes. If you didn’t get a drill bit then the correct size bit to use is a 6mm bit

Plasplugs Hollow Door

For anything up to the weight of a t-shirt they’ll just about hold but for anything heavier a proprietary fixing needs to be used. I put in some hollow door plugs which I thought might help the screws grip better but that has made it worse and the hinge is now coming away from the door. Firstly, cut your batten to the correct length for your needs and then sand off the rough cut edge so it’s nice and smooth. Using standard screws are ok to a point but if any weight or pulling force is applied to them, in most cases they rip straight out, especially when fixing handles to hollow doors due to the forces applied to them when opening and closing the door itself.I don't really want to buy a new door as that will mean having to actually buy 5 new doors so that the top landings' doors are all the same. And hanging 5 doors? Well, that's beyond the realms of my DIY skills. Insert a piece behind the existing - but a longer piece so you can drill and fix it above and below where the hinge is located. Now it's fixed, you can fix your hinge as normal. Measure and mark the centre point of your batten around 30mm in from either end, drill out two small pilot holes and then countersink them ( see our guide here on pilot holes and countersinking for more information). most internal hinges are desighned for no7 screws which are threaded all the way up i use 1 1/4" sevens for "hollow" doors Once leveled up, insert a screw each end and screw up tight to hold batten which adhesive dries out.

Which fixings for hinges of hollow door? | Screwfix Community Which fixings for hinges of hollow door? | Screwfix Community

If leaving the door in place and holding with screws, you can either use the hollow door fixings mentioned above or just use some standard screws, we will be using the latter in this case. Plasplugs specialised, Hollow Door Fixings are ideal for fitting coat hooks, name plates and other fixings to the narrow gauge of hollow doors and panels. We've recently moved into a house where the top hinge of the bathroom door was loose making it difficult to close as it was catching at the top. I was able to tighten the screws of this hinge against the door which resolved the problem a few times but now the screws are just not gripping anything as it is a completely hollow door.

Once level, use a screw or other thin pointed object to mark through the fixing holes on the hanging rail to show where you need to drill your fixing holes. Expanding wings grip securely in hollow doors, thin skin partitions, plywood and fibreglass. While multi-thread technology ensures superior holding power, this Plasplugs product is ideal for the home, boat and caravan. When it comes to actual physical fixings, these are the best fixings DIY Doctor have found for this job. The fixings in question are made by Plasplug and can be seen in the image below. There is a quite frankly staggering array of fixings available today for pretty much any object and any surface and the same goes for hollow doors, however as with most things, some are better than others. Adhesive Hooks