Clearwater CH0005 PH Plus Increaser for Swimming Pool and Spa Treatment

Product Information

Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Etching of pool surfaces: Acidic water can lead to etching of plaster, concrete, and other pool surfaces, making them rough and potentially damaging their appearance. It’s a popular method because it doesn’t raise the TA as much as soda ash will. However, the downside is that it’s not as effective at raising the pH.

pH Increaser - pH Plus Treatment for Hot Tubs, Spas Pro-Kleen pH Increaser - pH Plus Treatment for Hot Tubs, Spas

Start with the Total Alkalinity and aim for a reading of 80‑120 ppm. If it's low, add an alkalinity increaser, if it is high use a pH reducer.Water chemistry is a delicate balance at the best of times, and there’s various reasons as to why the pH level has taken a nosedive. In the event of spillage, clean up using clean receptacles and dispose of carefully. Do not add water to spilled materials. Do not use floor sweeping compounds to clean up spills. Sweep and scoop spilled material into clean, dedicated equipment. We’re sorry we missed you; we look forward to assisting you soon. Feel free to leave us a message and we will be in touch as soon as an agent is available. For urgent questions, you can reach us directly at It can damage your equipment. Low pH water will continue on from damaging your tub to damaging the equipment that runs your tub. As the water is constantly circulated, it will enter pipes, the pump, and the filter, causing destruction along the way. Repairing these can be costly and most of the time they have to be fully replaced.

pH Increaser | In The Swim pH Increaser | In The Swim

Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water. Work out the amount of sodium bisulfate needed. It depends on the volume of water in the hot tub and how much you need to lower the TA. As a guide, 3.5 ounces of sodium bisulfate will lower the TA of 1,000 gallons by around ten ppm. If your hot tub only contains 500 gallons, you’ll only need to add 1.75 ounces to lower the alkalinity by ten ppm. It also has a total alkalinity reading of between 80 and 120 parts per million (ppm). Keeping the alkalinity in its proper range helps stabilize the pH so it doesn’t wildly deviate. Installing a filter can affect the hardness of your water so you may want to install a water softener.Low pH (more acidic) levels in water can lead to damage to the pool or hot tub – notably the grouting or plaster as well as any metal objects. Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris.

Clearwater CH0005 PH Plus Increaser for Swimming Pool and Spa

Hot tub chemical maintenance is an essential part of owning a Lay-Z-Spa and is necessary for clean and healthy bathing water. It isn't complicated or time-consuming and can become part of a weekly routine. In our detailed Hot Tub Chemicals Guide you can find out everything you need to know from recommended chemical dosage amounts to hot tub chemical how-to guides. It is important to get your hot tub Chlorine levels correct. Not enough Chlorine can result in unhygienic bathing conditions, whereas high Chlorine levels can cause irritated eyes or skin. Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ.For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly).