Mechanical Keyboard Switch Puller Remover Tool for Cherry/Kailh/Gateron Switches Replace

Product Information

Once all the keycaps have been removed, use your switch puller to take out the switches. First, align the switch puller to the gaps found on the top and bottom of the switch. Once a proper grip has been established, gently pull out the switches. Note that this guide is for hot swappable keyboards only. Yanking a soldered switch runs the risk of breaking the keyboard’s PCB and the switch itself.

Just like you did with the keycaps, set the switches aside somewhere safe, or in the box that the new switches came in. Step 3: Install the new switches But with that said, the most significant reason to remove and replace switches is experimentation. As we have mentioned earlier, there are tons of switches outside the Cherry MX series. With hot-swap keyboards, users can try out all those switches without purchasing a new keyboard. Compared to the traditional switch puller, the Gateron switch puller is more easy to use and carry, which largely saves the time spent on removing switches. Insert your preferred mechanical switch replacement. Ensure the pins are aligned properly. Solder the switch accordingly for keyboards that require it. Cherry’s MX Switch series is the most famous mechanical keyboard switch and became the standard of mechanical keyboards. However, nowadays, there’s an incredible number of companies making switches, such as; Kailh , Razer , Logitech , HyperX, and many more .Consumers can still opt for the small metal puller, which is often included in the kit. that comes with their kit. However, these tend to be hard to use since they cannot properly grip the switches. The experience of using these is extremely frustrating, so we do not recommend them. The warranty does not cover the costs of consequential damage or indirect loss or any related expense of claiming under the warranty, such as loss from inability to operate the product. Products which are developed especially for use in the country in which they are sold, e.g. due to varying transmission systems and approval demands, are not covered by this warranty if defects or malfunctions are caused by the usage of the product in another country. If your mechanical keyboard only supports 3-pin switches, there is still a way to use 5-pin switches. However, this involves irreversibly modifying the switches by cutting off the two extra legs. We do not recommend this method and suggest preserving the switches’ original state for future builds. Best Tools for Removing Switches

Switches are a mechanical keyboard’s most important feature. Whether talking about professional keyboards made for productivity or gaming keyboards, the smoothness, fluidity, and sound are all about the switches. For switches that are a bit tighter, you can exert a bit more force. Make sure to use your free hand to support the case when removing switches. Attach The New Switches The warranty covers all defects compared to the specification of the product in question that may arise in the product within the below-mentioned warranty period, however, with the exceptions set out below. The Corsair K70 Pro Mini Wireless is hot swap compatible with all 3-pin Cherry MX-style switches. It's a great place to start for getting into customizing keyboards. Step 1: Remove the keycaps Replacing switches on a hot-swap board is very simple. Just take out the keycaps and pull out the switches using a switch puller. Once the switches are out, drop in the new switches, and you’re done. Just make sure that the switches are compatible with the PCB.You don’t technically need a keycap puller, as you can lever keycaps off with a thin plastic tool, or in some cases pull them off with your fingers; however, you will need a switch puller. Switches are nigh on impossible to remove without the correct tool. You took that photo we mentioned right? Because you’re going to need it now. Using the photo that you definitely took as guidance, install the keycaps by positioning them on top of the stem of the keyswitch and firmly pressing down. You’ll feel a small amount of resistance as the keycap is pressed down onto the stem. When the key has been pressed all the way down, the keycap is on.

Gently pull out the switch using a switch puller. For keyboards with soldered switches, desolder the switch from the circuit board first. Switch pullers may look pretty straightforward. However, choosing the right tool is incredibly important since it can speed up the whole process and prevent scratches or damages. Out of the three switch pullers that we have suggested, we recommend using the OEM switch puller and the Rama Works puller. Before you dive into swapping out your switches, remember one thing: Not every mechanical keyboard has switches that you can easily swap out. Some mechanical keyboards have switches that are soldered to the PCB, and what that means is that you must desolder the switches first before you can remove them.The UKs number 1 shop for mechanical keyboards, custom keyboards, kits, parts and everything else mechanical keyboard related. Hot-swappable keyboards have significantly made the lives of keyboard enthusiasts a lot easier. With just a few steps, users can easily replace the switches of their keyboards without soldering and desoldering. And best of all, there are almost no downsides to these kinds of keyboards. Hot swappable keyboards are great, because if you’ve gotten bored or have grown unsatisfied with how your current switches feel, you can swap them out to breathe new life into an otherwise aging keyboard. Accessories and spare parts (including but not limited to cables, carrying case etc.) sold separately i.e. not bundled with a Keychron product.