HB Body 222 Bumpersoft Car Body Filler Black Putty For Plastic Bumpers 250g With Hardener Excellent Adhesion Easy To Sand With P120-P240

Product Information

Thoroughly clean the bumper inside and out. Any dirt or grease will stop the filler bonding properly and ruin the appearance of the repair. Allow to dry and wipe down with solvent wipes, which are usually included in the kit.

The filler is supplied complete with the necessary fast epoxy hardener which will cure the filler in around 2hrs. Stay safe. Work in a well-ventilated, protected area. Wash your hands when you are finished, and optionally wear gloves for extra protection. This material is different to our rigid plastic strips and we encourage you to request samples if you are unsure which material to choose. Solid plastic stripsPrepare surfaces. Surfaces should be close fitting (pre-fit before joining), free of residue, and dry. Slightly roughen smooth surfaces to improve results. Rigid PVC strips are manufactured from a different material to our flexible plastic strips and we encourage you to request samples if you are unsure which material to choose. Apply adhesive. Apply it sparingly to one surface and press the parts together immediately. Hold in place until the bond sets. Do not reposition parts. Remove the masking tape and sand down the damage at the front to make the area a little low and create a rough surface for bonding. Apply bonding liquid if supplied. It depends on whether you choose rigid plastic strips or flexible plastic strips as to how bendable the plastic strip will be.

Apply a liberal amount of repair material to the damaged area so that you make the surface a little higher than surrounding bumper. Use a spreader like a squeegee to carefully smooth out the filler. Make sure to push the filler into any scratches to fill them right to the bottom. Cover with smoothing film if supplied and allow to dry and fully harden.Our plastic flat strips are manufactured in PVC and are solid all the way through, both in terms of material and colour. We get asked sometimes if our flat strips are foiled, with the colour just being on the surface of the product. They are not foiled, they are high quality products and are a solid colour all the way through. Bendable plastic strips Spacers and gap fillers, as the plastic strips can sit between two edges or slide underneath an edge to fill a gap.