Joined in 2023 
82 
63 About this deal
If you haven’t secured a floor mat properly, it can go out of place and all the dirt from your shoes can end up on the floor. Furthermore, just imagine a kidspilling the drinkdirectly on the carpeting.
Finally, hit the retainers with a hammer or stomp them with your foot with enough force for the anchor spikes to penetrate the carpeting. Why You Need Car Mat Retainers
Halfords Smart ForFour - Set of 4 Standard Car Mats 4 Clips (EE0857)
However, the anchor points can also be installed afterward. Furthermore, there are also means of using universal retention clips if you have some space between your vehicle’s carpeting and the floor. Retention Hooks Hence, you should use retainer clips on all mats that don’t have small spikes on their underside to grip the carpeting. Once the clip is placed, take your mat and place the hole over the hook on the clip. Push the mat down until it falls into place. Be careful not to push too hard or the hook will break. Also, it’s a good piece of advice to avoid using your foot or a hammer for pushing. If your new mats don’t have predetermined holes, then you’ll have to make them. Put the mat in place over the hook, and mark where the hole should bed.
Once you’ve installed all retainer spikes on your mat, place the mat on the carpeting. Even it out, and make sure that there are no bulges. The car floor should be flat and dry for proper anchor installation. Depending on the type of the floor mat and the vehicle itself, retainer clips can have various shapes. Therefore, they will grip the mat in different ways. However, the damage can be even worse than that if the liquid gets on the metal underneath. If you don’t notice and tend to it soon, that part of the floor will probably corrode.You’ll see that retainer spikes usually have two parts. Unscrew the upper part and leave it aside. Place the spiky part underneath the hole in the mat. Then, put the upper part above it and screw it tightly.
Nowadays, we can’t imagine a vehicle without car mats. They are easily removed; therefore we can change them if they wear off. What’s more, cleaning them isn’t as hard as cleaning the carpet.There are also hooks used by manufacturers like Lexus. You can install them with less hassle than the previously mentioned ones. All you have to do is to place them on anchor points in the floor and put the mat over them. Retainer Clips
Manufacturers rarely use spike retainers to secure the mats. Spike retainers are basically universal retainers you can use on different vehicles that have carpeting inside. Therefore, they are quite useful if you can’t find the right retainer clips for your car. How to Install Them Their purpose is to secure car floor mats in place. You may see them as a way to keep the aesthetics of your car floor intact. However, they are also a safety measure since floor mats that are out of place can get in the way of pedals. Nowadays, you’ll find most mat retainers alongside mats that come with vehicles. However, it may happen that some retainers will wear off or break over time.
The problem with floor mats starts when they are not secured to the vehicle’s floor. Loose floor mats are especially the case with older vehicles. Car floor mat retainer clips are usually small pieces of plastic that either work as real clips or, on some occasions, as pins. Put the mat on a flat surface like the workbench. Then, proceed to cut the holes either with some sharp tool or by placing a small metal tube on the mat and hammering it down. Just make sure that the holes aren’t larger than the diameter of the hook’s head. Retainer Twists
Great Deal 
New Comment