EVAPO-RUST® C700 Rust Remover, 946 ml

Product Information

The removal of the rust (iron oxide) reduces the proportion of iron to carbon, leaving a higher concentration of carbon on the outer surface. This heavier layer of carbon could cause a darkening of the metal due to the attributes of the carbon. The darkening does not have an adverse affect on the metal. It merely represents the movement of carbon from the interior of the metal to the exterior of the metal. However, there is one clear difference between acids and Evapo-Rust. While an acid will definitely get rid of rust, it also tends to eat away at the metal underneath. So, you’ll get rid of the iron(III) oxide, but lose a lot of healthy iron in the process.

Now, the product CAN remove rust in cold weather, but the process will be a lot slower than usual. Moreover, if the plastic container with the metal item is out in the cold, it doesn’t speed up the process if you move it to a warm space. It’ll still take time to warm up, making the removal slower. David: We make a lot of products and we’re constantly working on more. We have products that prevent rust from even occurring. We make a version of Evapo-Rust that’s really cool, it’s called Thermocure. If your car is running hot, you just put Thermocure and water in the cooling system and drive around with it. After a few days, you drain the product, and all of the rust comes out, which is the cause of the issue. Then your car starts running cool. Evapo-Rust is a soak remover. In other words, it works by submerging a rusty item into it and letting it sit there for a while. It’s similar to other powerful soak rust removers, like muriatic acid. In this conversation, David talks about his discovery of the solvent and other products that he has created along the way. With the help of sponge or some soft cloth put the liquid onto the rusting spot - don't take too much of Evapo. After that wait for ten-twenty seconds and wash it with water and another sponge.Evapo-Rust is an amazing rust remover, but it’s also a part of an entire range of high-quality products. I had the honor of testing a few myself and the results were positive across the board. Evapo-Rust Gel full safety for your hands, eyes and all other parts of body, there aren't any toxic materials in the product contents; It's very hard to give universal instruction of how to use the rust removing liquid. So, let's start with what producer says of how to use the liquid. It's stated that you can use the same portion of Evapo as many times as you want until it gets dark. Don't dispose the product as soon as you've achieved one of your goals. It'll reduce the costs and make your work with metal parts more effective. Before I do any submerging, I place the rusted piece inside of a container and mark the highest point it reaches; I leave the mark outside of the plastic container to avoid contaminating Evapo-Rust with the marker dye. I then pour the product, but I make sure that it’s a few inches below the marked point. Thanks to the Archimedes’ principle, the liquid will rise well above that point when I put the iron in. Step 2: Submerging the Item

EVAPO-RUST® is an amazing RUST REMOVER which is utilized by the U.S. Army, U.S. Navy, U.S. Air Force, FBI, NATO, Government Contractors, Engine Builders, Auto Enthusiasts, Gunsmiths, Forensic Labs, OEM’s, Farmers, Antique Restorers and more.

Become a CRC Insider

This really isn't cost effective to be used on large parts, but for small items it works quite well. Leave the item to soak for a few hours, then under running water scrub the rust off with a wire brush. The surface will be left with a matte grey finish that's very easily polished with scotchbrite. Aside from Evapo-Rust, you’ll need a few other tools and items to perform the removal safely. First off, you’ll require a container with a lid. For large pieces of metal, I recommend transparent modular plastic bins, since they are durable and you can seal them shut. But if you plan on removing rust from small items such as nuts and bolts, everyday plastic kitchen containers will do just fine. If you've ever tried removing rust from any metal parts, you won't say it's quite easy. Usually it takes lots of time and really huge amounts of money. But with up-to-date materials you can really make it easily. With Evapo liquid you only need to put the metal part in the liquid or just to moisturize metal with it. After using this thing you'll get the results in the shortest time. The producer says you'll actually get next results and wonderful possibilities: Evapo-Rust, on the other hand, only removes the rust. It does so through the process known as chelation. Large, synthetic molecules form bonds with atoms within metals and hold them firmly within the solution. Evapo-Rust’s own active ingredient chelates exclusively with iron; it will be strong enough to remove iron(III) oxide from iron, but too weak to remove iron from steel. What Is It Made Of?