Kair Anti-Mould Additive for Emulsion & Gloss Paint - 50 ml - Protects Against Mildew and Fungus Growth

Product Information

If you require any further information or would like to discuss your anti-mould paint additives in detail, please get in touch with a member of our team who will be more than happy to help you. Add 60g to 5 litres or 120g to 10 litres of emulsion paint by stirring in (ideally with a mixing paddle on an electric drill) and apply by brush or roller to create a “mould hostile” decorative finish. Add to standard emulsion paint and mix thoroughly until an even colour is achieved. Apply mixed paint as per the paint manufacturer’s instructions. Find the source of the moisture. Don’t forget to look for hidden leaks in walls and under kitchen cabinets.

Add Kingfisher Anti-Mould Paint Additive to almost any standard emulsion to make your own anti-fungal paint that matches the existing paint finish perfectly! Ensure that the area is well-ventilated before use. Wear relevant personal protective equipment (mask, gloves, safety glasses etc.). Spray existing green mould and moss with “ Kingfisher Bio Wash”, leave for 7 days to activate and then scrub or pressure wash to create a clean surface. The formula should be mixed thoroughly to ensure that the paint is completely protected. Since we used this over two years we have had no signs of mould appearing on the bathroom ceiling.Surcharges may be applied for deliveries to certain Post Codes. These include, but not limited to, the following Post Codes – Any paint that you have can be turned into an anti-mould coating to protect against mould and fungus in the home using Kair additive. Most customers buy “Anti Mould Additive” to add to an emulsion paint of their own colour choice. It can also be added to our “Kingfisher Weatherflex range of masonry paints in areas where green mould growth is prevalent on building exterior. Preparation & Application on walls and ceilings which reduces the formation of surface condensation. Unlike other anti-mould or anti-condensation paints which contain biocides or simply only absorb moisture, Suretherm can be overpainted and is an ideal solution for cold, exposed walls or areas where insulation may be missing or inadequate.

The anti-mould additive for paint by Keir range is an ideal way of combating nasty mould growth in a home. If you are embarking on a house refurbishment or other construction projection then our mould wash and paint additives are essential for ensuring your walls and ceilings stay clear of mould and fungus. If the project you are embarking on has suffered from damp and mould before, there is no need to worry, as long as you take the preventative steps to ensure that the area is clean and free from mould, you should be able to paint over previously mouldy walls with no problem. The glass microspheres effectively become ”charged” like a battery cell which enables them to retain heat for much longer compared to other decorative or specialist paints. Suretherm maintains surface temperaturesStorage: Store safely in frost-free conditions away from direct sunlight, sources of heat and foodstuffs When incorporated into a paint film, glass microspheres act as miniature Thermos-like bottles, providing a thermal barrier between cold surfaces and the warmer ambient temperature within a living space. As the air is insulated against the colder wall surface, condensation and mould growth is drastically reduced. Suretherm Anti-Condensation Paint (ACP) is a water based internal emulsion which will significantly reduce condensation and mould by utilising Glass Microsphere Technology. Unlike other anti condensation paints, Suretherm paint does not contain any harmful biocides. Suretherm anti condensation paint can be used in various applications where condensation can create problems where moisture forms and mould grows. The 50ml pot will turn 2.5L of paint into a anti-mould coating that once applied helps to prevent the growth of mould.