NexiGo PJ40 Movie Projector, 700 ANSI Lumens, Native 1080P, 4K Supported, 300 Inch, Auto Vertical Keystone, Zoomable, 20W Speakers, WiFi, Bluetooth 5.1, Compatible w/TV Stick, iOS, Android (Black)

Product Information

To enable it, select the low latency option using the Picture menu (press the menu icon while streaming HDMI content). Unfortunately, you must disable keystone correction. Toggle it off, then reset settings to default in the same menu to enter low latency mode. To enjoy games, try positioning NexiGo PJ40 in such a way, that it doesn’t require any keystone corrections. Some users say that the IOS wireless mirroring may come across failure occasionally, and you can try to restart the projector or your iPhone as there may be a lag. Otherwise, you can update the software of the projector. In addition, please follow the steps on the iOS cast on the projector screen and ensure the projector and your iPhone are connected to the same Wi-Fi Network. For wired connection, the two projectors are equipped with HDMI, USB, and AV, but NexiGo PJ40 has one more RJ45 LAN port. Conclusion

PJ40-support | NexiGo

As for image size, the projector can project at most 300 inches. It supports zoom function, allowing you to adjust the image size of the projector from 60% to 100%. Connectivity

Regarding ports, the projector is equipped with 2 HDMI (HDMI 2.0 and CEC supported), 2 USB, AV, RJ45, and a 3.5mm audio port. With HDMI interfaces, the projector can be connected to various external devices. On the whole, the design of NexiGo PJ40 follows the style of NexiGo’s overall design principle. Image away from the screen or wall, the image will get bigger, and as you push the projector closer to the screen or wall the image will be smaller. To properly

NexiGo PJ40 vs PJ30: 1080P Projector Comparison - Projector1 NexiGo PJ40 vs PJ30: 1080P Projector Comparison - Projector1

The focus, in this case, is powered, and you adjust it through buttons on the remote, which is more convenient than using a manual focus ring or thumbwheel. However, it's hard to control precisely. I wound up getting a reasonably well-focused image after first overshooting several times, but at the 90-inch-diagonal image size I started with, it wasn't as crisp or as detailed as I expect for the resolution.

Using the Zoom Range Slider

The keystone correction works well. I have to place the projector off to one side and it does a good job of projecting onto my screen. I think the picture looks really good to me as well. For my bedroom it's been awesome. the graphical representation of a projector in the middle of the calculator, you will see dimension lines that will tell you the Throw Distance

NexiGo PJ40: The Ultimate Home Theater Experience NexiGo PJ40: The Ultimate Home Theater Experience

The major difference between NexiGo PJ40 and PJ30 is the image performance. NexiGo PJ40 is slightly brighter. NexiGo PJ40 has 600ANSI lumens while NexiGo PJ30 has NexiGo PJ30 has 450ANSI lumens. It features built-in 20W powerful speakers that deliver enhanced sound quality, and Bluetooth 5.1 for easy connectivity to headphones, speakers, and other audio devices.

Verdict: A Reasonable Low-Cost Choice

If your selected projector has a Zoom Lens then the projector's Throw Distance or Image Size can be finely adjusted by moving the There is a small (and very reasonable catch), the brightness of the NexiGo PJ40 is tied to the fan speed. There is literally a control slider to increase the brightness (and crank up the fan). At max, the projector is definitely audible, but you can drown the noise out by using external speakers. In more intimate settings at night, I set the brightness to a minimum to enjoy the very quiet performance. Video NexiGo PJ40 and PJ30 are both cost-efficient, but NexiGo PJ40 is better because the projector has higher brightness, 4K support, and a more powerful speaker. Through the side-by-side specs comparison below, we can find that NexiGo PJ40 is more expensive but it is much brighter and has better overall performance. Specs

NexiGo PJ40 Movie Projector, 700 ANSI Lumens, Native 1080P

NexiGo PJ40 can also be used as a Bluetooth speaker, although in this mode, make sure the fan level is set to 1. Frankly, speaking I can’t imagine anyone being eager to use the projector as a speaker. Gaming measurement between the front of the projector lens and the surface of your wall or screen. Using the Zoom Range Slider While unboxing, grab a super glue while you are at it, as the rubber dumpers on the projector’s feet were very easy to peel off. A drop of superglue here and there should mend this. The central feet screws out, allowing for angle adjustments and when removed completely, the thread is used to fit NexiGo PJ40 to a tripod. Android, but not “smart” fit your image onto a screen you need a projection calculator tool or throw chart to tell you the image size dimensions at the corresponding NexiGo PJ40 doesn’t feature autofocus, therefore your viewing experience will start with adjusting the focus. If your projector is placed in a fixed position, it’s a thing you’ll do once, then forget about it.The PJ20 is larger than its most obvious competition, at 4.25 by 12.6 by 9.1 inches (HWD) and weighing in at 5.5 pounds, but setup is essentially the same as for any mini projector. You only have to connect the power cord and a video source, point the lens at the screen, reposition the projector to adjust image size if necessary (there's no zoom), and then focus. Typical apps may not be available, but the projector itself comes with a handful of features to make your viewing experience better. Or at least it would seem so. The home screen features a YouTube app, but until I performed a factory reset, the app would not open for me. The PJ20's menus include three predefined color modes with no options to adjust any settings, and one User mode that lets you adjust Contrast, Brightness, Color Saturation, and Sharpness. As with too many other inexpensive projectors, having multiple picture modes is almost pointless. Opening the menus covers the entire screen, and the modes are similar enough that by the time you get to the right submenu, change the mode, and close the menu, it's impossible to tell what, if anything, has changed. For my viewing tests, I decided to trust NexiGo's default choice, and used Standard mode. Thankfully, this is not a fad. You get a really bright and crisp projection that you could use in daylight without problems. On a very sunny day, it may feel a little dim, but as someone who lives in the UK, the constant overcast simply creates constant opportunities to use the projector throughout the day. A projection calculator is used to calculate a screen size when a projector is a specific distance away from the screen. As you move a projector