Fujifilm NP-W126S Lithium-Ion Battery for X-Pro1, X-E1, X-M1, X-A1

Product Information

Well, that's a piece of information I've not seen. Where did you read that about the X-Pro2 design? B&H lists compatibility for the battery as: X-T2 and X-Pro2. Why do they identify these two as fully compatible but not the X-T1 and earlier x models? You must have sources that say B&H got it wrong. I'm genuinely curious.

In Europe, there are very good Patona Platinum, Patona Premium and ExPro White. All of them offer >90% capacity of the original batteries and also they don’t seem to produce significantly more heat even after some heavy use. Lithium-ion batteries require circuitry to monitor the battery temperature during charging. The battery chemistry is subject to thermal runaway in failure cases. Such a failure is suspected to be the cause of the fire in the dive boat that killed 34 people in their sleep a couple of years ago. Well it's nice to know I can buy one of these more expensive NP-W126S batteries and use it in my X-E2 with absolutely zero gain in performance. HS50EXR HS30EXR HS33EXR Will this battery have any safety risks? What is the quality of the Fujifilm NP-W126S compatible battery?

There has been an Error

mm × 92.8 mm × 58.8 mm (35.4 mm excluding projections, measured at thinnest part)/5.22 in. × 3.65 in. × 2.31 in. (1.39 in.) in., 3690k-dot OLED viewfinder; magnification 0.75× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to −1.0 m−1; diagonal angle of view approximately 38° (horizontal angle of view approximately 30°) So, although capacity need not be a deal breaker issue for the OEM vs 3rd Party decision, it is not the only performance specification that needs to be considered. The FX1 charger will report the correct temperature of a thermistor equipped battery, but it does not terminate charging if the battery goes outside the 0°C to 45°C allowable charging temperature range. The user needs to stop the charging process if they notice that the temperature display is approaching the 45°C charge temperature limit."

Still pictures: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of 1/3 EV; AUTO; extended output sensitivity equivalent to ISO 80, 100, 125, 25600, or 51200 My old original NP-W126 currently, after several years of usage, has roughly 1100 mAh, while it had >1200 mAh when new. Lower quality batteries can show more significant aging, the DSTE battery is already almost unusable. Conclusion Auto, Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater

Accessories

Personally I have a couple of Fujifilm OEM batteries, but I am also satisfied with my Patona batteries (I think they are Watson branded in North America). This battery is made of top materials of Lithiumion cells that have been safely certified by RoHS, CE, FCC and tested through repeated simulated work and commissioning before they are shipped from the factory. On the other hand, its specifications are based on the original standards such as appearance, interface type, body size, capacity, voltage, charging current and voltage, etc. Is it real Fujifilm NP-W126S compatibility information? The frame rate and number of frames per burst varies with shooting conditions and type of memory card used. The original Fujifilm’s batteries for X system camera are expensive. That’s the reason why there are so many alternatives available, but it also makes the choice of the right one tough. They not only vary in price and capacity, but some 3rd party batteries can even swell in camera and potentially damage it. This article tries to help with the right choice due to extensive testing of capacities and heat characteristics of several available brands. NP-W126S Movies: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of 1/3 EV; AUTO; extended output sensitivity equivalent to ISO 25600

Still pictures: Exif 2.3 JPEG (compressed); RAW (original RAF format, uncompressed or compressed using a lossless algorithm; special purpose software required); RAW+JPEG available

fujirumors.com– JJC is offering a practical (and cheap) dual USB battery charger for Fujifilm NP-W126/S batteries fujirumors.com– TESTED: Third Party Fuji Batteries? “Inflated capacity values. Some batteries almost Fraud!”… and the Winner is…? I also used my thermal camera, Flir One for Android ( iOS version exists too), to capture batteries after a heavy load. While the original battery shows mostly evenly distributed heat on its surface, the noname battery has much higher temperature in a smaller rectangle in the middle. This might be the reason for swelling of some batteries. Self-discharging He now also published the most comprehensive guide to Fujifilm original and third party batteries I have ever seen on the web so far. However, even with a genuinely equivalent capacity to the OEM battery, there may still be differences in power delivery rate, self-discharge rate, and ultimate rate of decline in battery’s SoH (State of Health).