DualSense Starlight Blue Wireless Controller (PS5)

Product Information

If the procedure did not work, proceed to safe restart on your PS5 console by following the instructions below: Then you need to wait patiently until the update process completes successfully. Please do not close your console during this process. Otherwise, your console may be damaged. Way 2: Update PS5 via a USB Flash Drive This program can not only format a USB flash drive larger than 32 GB to FAT32, but also help you to convert MBR to GPT without data loss, recover lost files, and migrate Windows to SSD/HD. Step 1: Connect USB flash drive to your computer and launch the application to get the main interface. If you are returning your item for repair or replacement under warranty, we will endeavour to send out the repaired item or replacement within 48 hours of receipt.

As seen previously, when the PS5 controller flashes blue this means in the majority of cases that it has connection problems. Then try to to sychronize your controller again by doing the following: Another way to update PS5 system software is very useful, especially if your PS5 console is not working properly or can’t connect to the internet. Just follow the steps below to complete the update. Step 3: Your controller would restart and now reconnect the controller to the console with the USB cable. Then press the PS button.However, if the flashing continues or appears at another time, this may signal a controller malfunction such as a connection problem, a software bug in the controller or console, a battery fault or a hardware failure. In these cases, other symptoms related to this flashing will certainly appear at the same time (controller which does not turn on, which does not charge, which bug, etc.). However, you probably already know that Disk Management cannot format a USB flash drive larger than 32 GB to FAT32. Therefore, it is recommended that you use the MiniTool Partition Wizard to format the USB flash drive. If updating your PS5 controller manually doesn’t fix the PS5 controller blinking blue issue, then you need to continue to update your PS5. Solution 5: Update the PS5 Firmware Turning these off will keep the Bluetooth signal between your PS5 and the controller free of any interference. Step 1: Make sure your PlayStation is completely shut down and eject the USB flash drive on your computer. Then, insert the flash drive with the update file on your PS5.

Your PS5 controller should then flash blue for a few seconds, while the connection is made. It should then light up on the front, indicating that the connection has been made. If it does not and it continues to flash blue, it is highly likely that a software bug or hardware malfunction is causing it. Resetting the PS5 controller You can repeat steps 2 to 4 to connect your PS5 to the internet and set the Date and Time automatically. If you're using a standard PS5, the power button is closer to the bottom of the system. The PS5 Digital Edition has only one button, as there is no disc slot.Step 2: Navigate to System> System Software> System Software Update & Settings> Update System Software> Update Using Internet.