National Hardware V852 Anti-Sag Gate Kit

Product Information

A 3/8-inch diameter turnbuckle, which is strong enough to handle most residential fence gates, can handle a working load of 1,200 pounds. In comparison, the Homax kit can adapt to more gate builds and repair project than the Adjust-a-Gate simply due to its separate parts. Depending on your gate’s height, weight and design one should choose the type he should use for fixing his sagging gate. Turn the metal piece between the hook and the eyelet on the turnbuckle clockwise to begin tightening the cable. Remodelista, Gardenista, 10 Easy Pieces, Steal This Look, 5 Quick Fixes, Design Sleuth, High/Low Design, Sourcebook for the Considered Home, and Sourcebook for Considered Living are ® registered trademarks of Remodelista, LLC.

If at any time you want to become a Subscriber and enjoy unlimited, ad-free access to all our content, just go to the My Account link and choose Subscribe. The bracket clamps on the inside of the wooden gate, which eliminates the need to drill into your gate . Adjust-A-Gate building kit comes with a patented truss cable system that keeps your gate from sagging or dragging. You’ve also learned preventive measures to keep your gate in top shape and answers to common questions about sagging gates. Fixing a sagging fence gate is not a difficult task to complete, and you can save a considerable amount of money if you choose to take this job on yourself.The Gate Corner Frame Brace Kit is the most popular because it comes with all the necessary parts that you need to install and a clear set of instructions on how to set up your gate frame. If you need to replace the hinges, you’ll want to check the ones currently on the fence and purchase the same size. If you can spin the screws with your fingers while they’re still in the post, then they have stripped out the hole and are no longer securing the hinges and the gate to the post. If it isn’t, the latch side of the gate will drag on the ground when you attempt to open or close it.

The kit consists of two brackets that install on opposing corners of the gate and a metal wire and turnbuckle that provide the bracing. This gate hardware kit is like a frame which has a patented truss cable system that keeps your gate from sagging or dragging. Package: check whether you are getting everything what is needed for the kit installation along with the step by step installation. Fixing a misaligned chain link swing gate or a swing gate that isn’t latching properly requires an open-end wrench/pliers, a marker, and a small carpenter’s level. Most options will be weatherproof, which means that it is designed to withstand all weather, be long lasting and rust resistant.As you can see, this simple anti-sag gate kit contains a rectangular metal frame and a diagonal support strap. Your resource for finding the best storage and home organization solutions for every room in the house. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. We’ve rounded up a range of options—from tension kits with turnbuckles to steel braces—to counteract middle-age sag in garden gates. because he didn't have to spend a whole day fixing the gate and he will never have to fix the gate again.

The heavy-duty Anti sag gate kit will resurface your gate until all of your gates remain free from damage, including the tongue and grooves from dirt, bird droppings, sap, and solar rot.Take a diagonal measurement of your gate, and make sure you purchase a kit with a wire cable that's long enough for your gate. This positioning distributes the bulk of the gate’s weight to the base of the post, taking pressure off the top hinge. It consists of a metal piece with a hook threaded into one end and an eyelet threaded into the other.

The Adjust-A-Gate system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. Sometimes, the weight of the gate can cause the post to lean in the soil, leading to a sagging gate. You should consult with a licensed professional and check local permit requirements before starting any project. If the gate still sags, checking the gate hinges for rust or bending is another cost-effective solution. Thread the other end of the wire cable through the eyelet, loop it back on itself and attach the cable clamp.If the screws are still viable (as in not stripped or rusty), then simply tighten the screws using a power driver to pull that sagging gate back into place. The one-stop sourcebook for the considered home, guiding readers artfully through the remodeling and design process. Use your screwdriver or power driver to tighten all the screws that attach the hinges to the gate and post.