KitchenCraft Flexible Bowl Scraper Tool, Plastic, 17 x 10 cm,White

Product Information

The front bevel edge needs to be sharpened at a precise angle and should get the most attention during sharpening.

With the new angle locked in, position the protractor at the bevel edge of the scraper and take a look at the gap created. Designed with professional chefs in mind, the Dexter-Russell Sani-Safe Dough Cutter/Scraper features a hygienic polypropylene handle which is textured for extra good grip, temperature resistant, and with no gap between the handle and the blade to prevent bacterial growth. With the extra burr added to the scraper edge applied with the burnishing tool, raise the tool rest a bit and angle the scraper downward. Having 2 dough scrapers is even better than one as you can use one to clean the other, so it’s fortunate that the Stainless Steel Dough Scraper by Utopia Kitchen comes in a double pack!On the other end of the spectrum, shear-scraping, which shaves away little blemishes, is almost silent. This versatile stainless steel scraper features a built in measuring guide and a 6 by 4 inch blade with 90 degree corners for a clean cut.

Also, it can be helpful to bring a light source close to check for any gaps between the scraper bevel and the sharpening wheel. I use the round nose scraper when I have an area of the bowl inside that is not cooperating usually because I wasn’t paying attention to the depth of my cut and I’ve made the wall too thin in an area. Firmly hold the scraper in place and glide the hone up and down the bevel edge making sure to maintain flush, flat contact with the scraper’s bevel. When using the round nose scraper, the angle of the tool is fundamentally important to success with this tool.The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl work, e. This seat is machined into both sides of the shaft so that when cutting either side of the captive ring, the cutter is angled to the front and into the direction of the cut, giving more control over the cut whilst keeping the tool flat on the rest. The black colour also makes it easy to spot any bits of cake batter you may have missed in the washing up bowl.

They were made to be professional quality and this brand has actually been in operation with this specific design since 1905. Just like understanding the bevel angle of a bowl gouge, the angles do not have ground to an exact angle. With the sharpening grinder wheel off, I usually loosen both the platform and sliding arm locks to freely move the platform to the desired angle.

We tried a variety of wooden, plastic and silicon spatulas to see what performed best in the test kitchen. With a little practice and some guidance, I was able to convert the round nose scraper from a tool of dread to a joy to use.