Wärmer System M10 x 15mm Copper Tap Tails for Monobloc, Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement

Product Information

Their technical excellence makes the most reliable, fit for purpose brassware products in the market today. We would like to continue to send you information about relevant products, news and services from Bristan Group.

As said never use a pipe slice on the copper tails the pipes are to soft,use junior hacksaw a file the end smooth if you use push fit. Yes they will work fine providing you are careful not to unscrew the tail whilst tightening the compression.Clamoing ring with three fixing screws for a secure fix to the basin which will not come loose if installed correctly. all the monoblocs I've fitted have come with smooth wall tails, can't bend 'em or nowt so only practical way is to solder. Additionally, while the water is off it’s a good idea to fit isolation vales for any work you may need to carry out in the future. The slots each occupy just under 1/4 of the diameter of each disc, a little way in from the outside.

So if the base of the cistern is 2 metres above the floor, and the tap outlet 1 metre above you will have ((2 - 1) / 10) = 0. But it's a bit of a minefield actually as I've found that Victorian Plumbing and Tap Warehouse seem to list much higher flow rates than what the manufacturer's data sheets say in many cases. It comes with extended lever handle making it particularly suitable for installation in any healthcare or disabled toilet room setting.When closed, the slots in the upper disc are covered by the unslotted portion of the lower disc, and no water flows. Register your product with us now, and if you do have any queries after installation, we'll be able to identify your product and give you the best advice quickly. If you do not have any isolation valves handy to cut off the water supply while you carry out your work then you will have to ensure that the water is turned off. The Armitage Shanks Contour 21+ Single Lever Basin Mixer Tap with c opper tails is an anti-vandal unit ideal for installation within any commercial or domestic space. Product will work on low pressure providing the flow regulatoris removed and replaced using a flow guide (A960191NU).