Pro-fit Innovations Magic Gripper Adjustable Door Clamp 2 Pack

Product Information

Before starting, it is a good idea to check there are no cables, pipes or wiring hidden under the floor.

You’re going to be making marks on the floor, and you don’t want to get your pencil marks confused with existing markings.You also need to make sure the angled nails are facing towards the wall, so the carpet can be stretched over them. If you’d rather leave it to an expert, just pop your name in our simple online formand arrange an appointment for our free measuring service. Read on to find out how to measure your new carpet, what tools and accessories you'll need, how to lay a carpet, and how to care for a new carpet. For example, you have to consider the underlay underneath the carpet and edge grippers to ensure the carpet remains in place around the room’s edges.

If in doubt – stick down the gripper and door plates with Gripfill instead of nails in the offending areas. Apply gentle pressure as you hit the flat end of the kicker with your knee – this will push the carpet forward. Here’s a couple of tips if you’re choosing the DIY option, and we hope it will help you do the job as it its quite easy if you are “handy”. From carpet gripper to door bars and underlay, if you don’t want to take advantage of the recommended fitting arrangement service and fancy fitting the accessories yourself, then read on for our top tips on how to fit them perfectly today! Don’t worry, you’ll be installing the rod up against the wall, but you’re going to be marking out first.

It can also help to significantly reduce your energy bills by trapping heat and increasing insulation.