BOHLE Hardwood Wooden Wedges x 50 Pieces BO 5162002

Product Information

There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

But if you have painted heavily on the sides that sounds even more challenging, as your canvas will now hold a box shape even without the bars and it will be hard to get that to lie flat even for the few mm you need to pull over the edge. Trying to get rid of them is very frustrating if they don’t respond to the slight adjustment of inserting the wedges or water on the back.

If it’s a good painting it may be worth the effort, and it could be a learning experience to practice re-stretching. When you purchase stretcher bars to make your own canvas, you will receive eight wedges per four bars (to make one canvas). Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.

Attach the jig to the mitre gauge where the thickness of the wedge is determined by the distance between the stop block and the cutting line of the blade. If your corners are fixed then you cannot tap the bars apart and if there are no slots you cannot then insert a wedge to hold the expanded bars apart.Best practice is that you should do all the movement of the bars by pulling and tapping on the bars to expand them and only inserting the wedges after you have expanded the frame.

I have often found that hot water won’t be enough either, it looks tight for a day or less then sags again. Whacking them in forcefully could cause too much tightening of the fabric on one corner and uneven tension could cause that corner to eventually tear. Planing stop: Used with a couple of bench dogs, a wedge can be tapped to lock the workpiece on the bench for hand planing. I find this allows the wedges to be pushed in further before you start tapping on them and gives a tighter canvas.The wedges are asymmetrical and they work well in either orientation – if you insert them with the long side or the short side against the side of the stretcher bar. We have the facilities to cut your bespoke timber to any size or specification, contact Ryder Services now to discuss your specific project requirements.