Intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths. Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use. Make sure you know, therefore, how easy a product is to use before you buy, so that you’re not left uncertain before applying. What's more, be sure to read the instructions so that you know what to expect during the cleaning process. How to Prevent Mould and Mildew

This year marks the 35th anniversary for LTP’s Grimexdeep cleaner – one of LTP’s top-five best selling products. The heavy duty “grime and stain remover” remains a firm favourite within the tiling and cleaning sectors, providing a solution for a myriad of issues, indoors and outdoors. Still featuring the original formulation, Grimex is designed for all types of natural and engineered stone and tile, from limestone and marble, to ceramic and porcelain. It can be used to remove residue before application of a sealer; to daily and deep clean surfaces and to renovate tiles in all environments, including historic settings.As LTP Grimex is effective at removing the seal from natural stone surfaces, you may wish to reseal or enhance your surface after use. Maintaining your sealed surface with the correct maintenance product will extend the life of the seal and offer additional protection. The manufacturer suggests that protective clothing, eyewear and gloves are worn and that it is to be kept out of the reach of children. If irritation occurs, it is advised that you seek medical advice or attention.

Dilute one part LTP Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water. Spread out evenly using a roller, sealer applicator, paintbrush or sprayer. Allow to dry for 30 minutes. Apply a second coat and leave to cure for a minimum of 1 hour before grouting. Jointing compound is made from different ingredients to cement or sand base trowel-in grouts, so removing residues requires a specific solution. LTP Solvex is a high-performance, non-caustic remover designed to soften polymers, making residue easy to remove. To restore your paving, use the following process:Before you use your grout cleaner for the first time, consider your own safety as well as the safety of anyone else in your house. It may be tempting to use 10mm porcelain tiles for your external paving project, either because you like a particular design or colour, or the tiles are a lot lighter and easier to handle than purposeful 20mm outdoor porcelain paving. However, we recommend against using 10mm tiles for your external paving project. If you’re beyond pre-grout protection and grout residue has dried onto your paving, don't worry - there are various types of residue remover that can save the day, including LTP Cement Grout & Salt Residue Remover . This intensive cleaner is effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and restoration of artificial and natural tiles and floors, this cleaner is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles.