WARNING: If any parts are missing, do not operate your machine until the missing parts are replaced. Failure to follow this rule could result in serious personal injury.

RAGE3-S300 210mm Multipurpose Sliding Mitre Saw - Product Code: RAGE3S3001 (110v) / RAGE3S3002 (230v)Place the workpieceontheRotaryTable andagainst the fence in the desired position. Secure with clamp(s) as appropriate. Always ensure that you have selected the correct saw blade for the material being cut. Do Not use this mitre saw to cut materials other than those specified in this Instruction Manual. Before attempting a cut, make a‘dry run’with the power off so that you can see the path of the blade. WARNING: Only use genuine Evolution blades which are designed for use in this machine. Ensure that the maximum speed of the blade is compatible with the machine. Only perform this operation with the machine disconnected from the mains supply.

Hybrid Table/Mitre Saw Design: The FURY6 stands out with its convertible design. Switch between a table saw and mitre saw seamlessly, adapting to your project’s needs. It was used for general DIY for a few years then was the workhorse saw for a big redevelopment at a business unit I had, now it has the house extension, garage, all the fences, skirtings, architraves, concrete formwork, every piece of wood I have put in for the last 14 years has probably been cut on that saw, when I go on tour to parents or brothers to do projects, it comes with me. So a good saw, paid for itself 100 times over. The saw is also workbench mountable and supplied with rubber suction feet which help to keep it firmly in place on work surfaces. Place the saw on a firm, level surface where there is plenty of room for handling and properly supporting the workpiece.Table Saw – Sturdy rip fence allows for fast, accurate straight cuts to be made on wood materials. Do not cut metal or metallic materials when the machine is configured as a Table Saw. Mitre Saw mode – Mitre stops (left & right) at 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40° & 45°. WARNING: This product is a Hand Operated Compound Mitre Saw and must only be used as such. It must not be modified in any way, or used to power any other equipment or drive any other accessories other than those mentioned in this Instruction Manual. Also features durable die-cast aluminium base, resistant to the most demanding metallic applications.

If you miss one of your scheduled instalments and Klarna are unable to automatically withdraw the money from your account 2 days later, you'll be issued with a statement for the full amount due. Long work pieces should be supported on the work supports provided or on appropriate additional work supports.

Evolution Project Products

Evolution FURY6 210mm Convertible Table/Mitre Saw (230v) – A Fusion of Functionality and Flexibility

If you need to make cuts in steel box, for example, it’ll handle the job with ease and the cuts are left burr-free, smooth and ready for welding. Plumbers will love this saw as they’ll be able to go from cutting plastic pipes to metal pipes without even thinking of taking the time to switch over blades. First fix applications where you need to cut wood where the presence of nails is likely will also benefit for opting for the RMS210+.

One added benefit is that a manual mitre saw will likely cut to a much larger depth than a power mitre saw, and the Draper Precision hand mitre saw can cut to heights of 100mm. This allows it to cut bevels, but it's unlikely to be large enough for use cutting exterior corners for skirting boards. Safer cuts – Blades that are not well made can create fire, explosions, fumes, and smoke. The made on this tool is of the highest quality and produces little heat and fewer speakers making it one of the safest blades to use. Note: A workshop dust extraction device can be connected to the extraction port found at the rear of the machine if required. Where it is necessary to use spacer or reducing rings these must be suitable for the intended purpose and only as recommended by the manufacturer. taking account of all parts of the operating cycle, such as the times the tool is switched off, when it is running idle, in addition